What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

siooss

Full Access Member
Joined
Dec 29, 2012
Posts
326
Reaction score
614
Location
Florida
I added a 1/3 quart, no issues
But what is that CAI you have? At first I thought the thing was duct tape.

CAI is a Volant, wrapped with https://www.heatshieldproducts.com/cold-intake-shield, put adhesive backed shielding on box, with headers, figured every degree cooler air helps, have air scoop as well. Added heat reflecting material on fire wall, fuel rail, sleeves for spark plug wires, A/C lines and the like.
 

Chiefapple

Full Access Member
Joined
Nov 3, 2017
Posts
812
Reaction score
922
Location
Milwaukee, WI
Cleaned the throttle body and replaced the valve.

d7e39bfbbe5d14a1b5a393c58467ffc0.jpg
07b9a27f81cd35a0410f7bdf3f9a7e50.jpg
6af04ef95f66efab5ac648f7d1f06cc6.jpg
20a7d6496a0a03b3496dd0c94703fb80.jpg
554d89abb45c36e43644db4ed91591f3.jpg


Sent from my iPhone using Tapatalk
 

renegadeagle

Full Access Member
Joined
Oct 8, 2011
Posts
238
Reaction score
63
Location
Puerto Rico
Did another "me too" upgrade, swapped out to the heavy duty transmission cooler, easy enough. Recommend not adding transmission fluid to the cooler as recommended. I added the recommended amount by Forge Off Road and resulted in overfull condition with transmission fluid that came pouring out when removed the plug/dipstick. Had to remove some fluid, oh well. Easy enough to add fluid through the plug/dipstick if needed.
View attachment 129877
View attachment 129878

Where did you purchase your heavy duty transmission cooler??

Best regards
 
Top