Triple Fog Light Kits Featuring 100% American Made/Stainless Steel Brackets

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Brandon wasn't happy with his previous light mounting system. He had a tough time keeping them clean since the design funneled mud in. Not to mention the powder coating was flaking off the system bigtime. He came to us looking for a solution so we let him in on the secret ingredient to a successful off-road trip. The SPP brackets. Made right here in the USA these rock solid brackets ensured his lights stayed attached to his bumper AND that the brackets can hold up to the abuse he planned to throw at the truck.

He was so happy with his setup he made a little video and put them to the test


Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/

69442562_2420613564894892_1674651394168061952_n.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Brandon was kind enough to send us some shots of his truck. He swapped out the bezels he had for our SPP Brackets and upgraded from the KC Light to a nice set of Baja Designs S2 Pros. Looks awesome Brandon

p.jpeg


p.jpeg


p.jpeg



Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/

69442562_2420613564894892_1674651394168061952_n.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
@ecoboost.rapptorr rocking his new Triple Fog Light Setup. Looks great!
upload_2019-9-16_11-38-31.png

Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/

69442562_2420613564894892_1674651394168061952_n.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
SD1290 upgraded his existing Baja Designs "Pro" Kit with some Squadron SAEs from us. We stock/sell all of the Baja Designs lights so even if you have an existing fog setup, we can help upgrade your lights to some new ones

dda3a7aa-7942-42d6-8544-65e445362913-png.129276
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Just a friendly reminder that YES, our kits ARE available with SAE lights from both Baja Designs and Rigid Industries. Since Day 1 of the Baja Designs SAE release we've offered these as part of our kit. In fact, it's one of the more common configurations (Squadron SAE Wide Cornering, Squadron Pro Driving/Combo, Squadron Pro Spot is the most popular setup).

We also offer IR lights from Baja in the kit.

For the Rigid fans, we've always offered the SAE line which is another popular option (SAE, Driving, Hyperspot is popular).

Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/

69442562_2420613564894892_1674651394168061952_n.jpg
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
We recently hooked Deepak up with some lighting on his Raptor. Our SPP Triple Fog Light Kit, 30" Baja Designs S8 Grille Kit and of course the S2 Reverse Kit. Looking sharp!

84506_1604_2d574fe9_11b0_41fb_8862_471a5eec4ed1.jpg


84506_1604_84a45c91_7576_4754_9fbd_c4bd417b6124.jpg


Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Daniel just posted some photos up on Facebook of his new install. He went with the Squadron Pro Driving/Combo, Squadron Sport Wide/Cornering Amber and S2 Pro Wide Cornering lights. We had a lot of back/forth trying to design the perfect lighting setup for his truck and it was well worth it. He's now got the perfect lighting setup for where he lives.

Make sure to PM us and we'll help you design the perfect setup for your driving needs.

71144232_10156576526007584_29232986230620160_n.jpg


70823331_10156576526027584_1206015843075358720_n.jpg


Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Why not give our SPP Triple Fog Light Kit a shot. There are many reasons to choose this kit over others... here are a few

-The SPP Brackets are made right here in America
-They are made from Stainless Steel
-They are HEAVY DUTY (they won't bend)
-They offer mounting points that allow you to move the entire assembly up/down (so you can center your lights and level them)
-They have a channel that the lights bolt into, allowing you to slide them forward/back/left/right (so you can align your lights)
-Our wiring harness is custom designed by us and made specifically for the Raptors
-The wiring harness connects 3 pairs of lights, to 3 different upfitters (going with the Rigid Radiance? We include a control wire for the back light)
-These are always in stock in our Long Island warehouse, ready to ship
-Finally we can MIX AND MATCH lights. Want to go with some KC Flex and some Baja. No problem. How about a Rigid Radiance and two Baja Squadrons? No problem either. We'll customize the harness prior to shipping it to you

We offer the brackets alone or paired with some Baja or Rigid lights. Choose from S2 Sport, S2 Pro, Squadron Sport, Squadron Pro, D-Series Pro, D-Series SAE, Radiance Scene or Radiance Pod. We can even customize the order with KC, ZROADZ or any of your other favorite light brands.

All orders ship FREE within the lower 48 US states
Orders also include a FREE T-Shirt
And we throw in some cool swag

Full kits start at only $549 (which includes EVERYTHING)


2017+ Ford Raptor Triple Fog Light Kit (w/Baja Designs Lights)
http://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-baja-designs-lights/
image__32811.1545275370.png


2017+ Ford Raptor Triple Fog Light Kit (w/Rigid Industries D-Series)
http://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-d-series/
image__74908.1546380907.png


2017+ Ford Raptor Triple Fog Light Kit (w/Rigid Industries Radiance Pods)
http://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-kit-w-rigid-industries-radiance-pods/
image__72559.1546380557.png


2017+ Ford Raptor Triple Fog Light Brackets
http://www.4x4truckleds.com/2017-ford-raptor-triple-fog-light-brackets/
image__87916.1545280402.png

raptor6-jpg.124186
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Nothing makes us happier then hearing from our satisfied customers. Here's what Daniel had to say about our SPP Kit recently:

upload_2019-10-10_21-48-14.png

Our SPP Triple Fog Light Kits include everything you need in 1 easy to install kit.

-Stainless Steel Brackets made right here in America. Designed by a Roush dealer to serve a purpose (a high quality adjustable bracket)
-3 Pairs of Lights of your choosing so that you get the best bang for your buck
-A custom-made, Raptor specific all-in-one wiring harness to make things real quick and easy on the installation side
-All the nuts/bolts/instructions you need to get this bolt-on kit installed in no-time.

Plus we're always at your disposal to offer tips/tricks and assistance.

You can settle for other fog kits that have cheap brackets that bend at the mounting locations. OR you can grab this kit with some of the most sturdy, adjustable brackets on the market. We're also letting you choose all 3 pairs of lights, so we're not locking you into a light you're stuck with.

Not sure what lenses to go with? Well let us help you pick, and if you go with the Baja Designs lights you can always change them out later on... WITHOUT removing the lights/brackets. Our kits let you change your lenses quick and easy. You don't have to disconnect any wires, remove any brackets or remove the lights. Can't beat that.

Available here with your choice of Baja Designs or Rigid Industries lights (you can also grab the brackets/wiring harness and use whatever lights you like)

http://www.4x4truckleds.com/specialty-performance-parts/


69442562_2420613564894892_1674651394168061952_n.jpg
 
Top