Cam Phaser/ Engine Failure Poll

NORCAL SS · Sep 21, 2019

Mstgkillr said:
Do you have documentation that you can share, specific to vehicles built after April 8, 2019, having revised phasers and new PCM calibration? And what exactly was calibrated in the PCM? I really hope this to be accurate, considering I have May 2019 build date!

If this is correct, and the cam phaser issue has been resolved for the vehicles built after April 8, 2019, is Ford installing the phasers with the updated design (part #) AND reflashing the PCM for vehicles coming in with phaser issues? It appears that some have had the phasers replaced twice, and continue to have problems.

If PCM calibration is truly part of the root cause, I wonder if the new factory calibration carries over to those with aftermarket tunes? It appears this would be a good way for Ford to easily deny cam phaser warranty claims for anyone with an aftermarket tune.

Not sure of this info. Folks getting fixed since that date are still reporting failures.

greatone99 · Sep 21, 2019

its looks like that tsb was for 17 and 18 f150s ,the April date was referring to the navigator .

Joe12345 · Sep 22, 2019

I found this thread in googling the very loud, very rapid ticking noise that I noticed my raptor making today. 300 miles on the odometer, with a sticker build date of 06-06-2019. Do I need to start worrying now and head to a dealer? It seems to disappear after the truck has warmed up and been driven for a few minutes.

wipit · Sep 22, 2019

Does the phaiser have any influence on the performance

Raptor911 · Sep 22, 2019

This is what bad phasers sounds like and it is only when you start it up and more pronounced if it is a cold start:

JJexp said:
I found this thread in googling the very loud, very rapid ticking noise that I noticed my raptor making today. 300 miles on the odometer, with a sticker build date of 06-06-2019. Do I need to start worrying now and head to a dealer? It seems to disappear after the truck has warmed up and been driven for a few minutes.

NORCAL SS · Sep 22, 2019

wipit said:
Does the phaiser have any influence on the performance

Yes, if you consider stretched chain, out of time, broken internals performance.

Fender · Sep 22, 2019

I haven't received a recall notification, nor do I have any signs of rattling/noises, I dont need to change the phasers then ?

NORCAL SS · Sep 22, 2019

Fender said:
I haven't received a recall notification, nor do I have any signs of rattling/noises, I dont need to change the phasers then ?

Nope. There is an SSM for people that have the cold start rattle, and a TSB is forthcoming. Curious what date range it identifies. Hopefully at that point, they have revised parts to fix.

smurfslayer · Sep 22, 2019

Mstgkillr · Sep 22, 2019

smurfslayer said:

Unless this NORCAL SS is an imposter, “Tony” has been around forever in the GM community, and made substantial contributions to every forum that he has participated in.

Cam Phaser/ Engine Failure Poll

Have you had or have a cam phaser or engine failure on your Gen 2?

Yes

No

I don't have a Raptor but will still vote and comment

NORCAL SS

Full Access Member

greatone99

Full Access Member

Joe12345

Full Access Member

wipit

Full Access Member

Raptor911

FRF Addict

NORCAL SS

Full Access Member

Fender

Full Access Member

NORCAL SS

Full Access Member

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77

Mstgkillr

Active Member

Similar threads

Members online

Forum statistics

Latest posts