Phoenix Android Radio 4th Gen PX6

Nerdles1 · Aug 20, 2019

This may sound crazy but I do not have a Facebook account. I sent them an email. In the mean time I am trying that July 29 file posted earlier in the thread followed by the canbus one.

Sent from my iPhone using Tapatalk

BDF · Aug 20, 2019

There are 3 things, mcu update, px6.img and simplecan

The px6 thing is a start from acratch

Nerdles1 · Aug 20, 2019

I did px6 thing waited 20 min to complete still doing the same thing. Not that it matters but tried the simple can couldn’t find where to install it like px3 held the system info screen entered code 7890 didn’t see the simple can update selection. I found those 2 files the MCU update file I couldn’t find. I even tried the set to factory defaults thing I ran in to.

Sent from my iPhone using Tapatalk

nikhsub1 · Aug 20, 2019

Mine just arrived. Install this weekend.

Jonnie510 · Aug 21, 2019

Nerdles1 said:
I did px6 thing waited 20 min to complete still doing the same thing. Not that it matters but tried the simple can couldn’t find where to install it like px3 held the system info screen entered code 7890 didn’t see the simple can update selection. I found those 2 files the MCU update file I couldn’t find. I even tried the set to factory defaults thing I ran in to.

Sent from my iPhone using Tapatalk

Try renaming the px6 file to px6_format or format_px6 and load it again.

Sent from my iPad using Tapatalk

ROBERT F HAVENS · Aug 21, 2019

Nerdles1 said:
Anybody using built in CarPlay. I just installed my px6 left the cables in from the px3. I have noticed that when using the built in full screen car play the steering wheel controls don’t work properly. You cannot skip to the next track. When I use CarPlay through sync it works properly. Are there any links to all the current files can,mcu etc.

Sent from my iPhone using Tapatalk

The steering wheel control issue seems to be effecting 802A package version with the 8 inch factory display version. I have the same issue. I think Guy had the 4 inch factory version and he does not have the problem. I have asked reported the issue to Phoenix and not gotten a response as of yet. I am using the on-screen controls and getting used to remembering to do that. Again this is only effecting things outside of the factory Sync3 system/apps. In my case it does change the song on the built in apps or the android auto and apple car play add-ons I got on the Phoenix system, but it switches the audio source back to the Sync3 system and goes to the next saved preset station. A little weird but I work around it.

ROBERT F HAVENS · Aug 21, 2019

Nerdles1 said:
I did px6 thing waited 20 min to complete still doing the same thing. Not that it matters but tried the simple can couldn’t find where to install it like px3 held the system info screen entered code 7890 didn’t see the simple can update selection. I found those 2 files the MCU update file I couldn’t find. I even tried the set to factory defaults thing I ran in to.

Sent from my iPhone using Tapatalk

You could try clearing the cache and data from the app in the main Android settings under apps. I sometimes have to do that with Waze since I run the beta versions and once in a while there are issues.

ROBERT F HAVENS · Aug 21, 2019

BDF said:
What
MCU version do you have on the system info screen under settings? 9507 or 9717?

Here is what I have

Sent from my SM-N960U1 using Tapatalk

Guy · Aug 21, 2019

No.

My raptor is a fully loaded 802a with tech and heated rear seats, etc.

It is, however, a 2017 Sony model. The electronics did change some for 2018, including the layout of the fuse panel.

I don’t have any glaring flaws or faults. No significant glitches or bugs. It just works. It works really well! It’s leaps and bounds ahead of the px3. I couldn’t be happier.

ROBERT F HAVENS said:
The steering wheel control issue seems to be effecting 802A package version with the 8 inch factory display version. I have the same issue. I think Guy had the 4 inch factory version and he does not have the problem. I have asked reported the issue to Phoenix and not gotten a response as of yet. I am using the on-screen controls and getting used to remembering to do that. Again this is only effecting things outside of the factory Sync3 system/apps. In my case it does change the song on the built in apps or the android auto and apple car play add-ons I got on the Phoenix system, but it switches the audio source back to the Sync3 system and goes to the next saved preset station. A little weird but I work around it.

ROBERT F HAVENS · Aug 21, 2019

Guy said:
No.

My raptor is a fully loaded 802a with tech and heated rear seats, etc.

It is, however, a 2017 Sony model. The electronics did change some for 2018, including the layout of the fuse panel.

I don’t have any glaring flaws or faults. No significant glitches or bugs. It just works. It works really well! It’s leaps and bounds ahead of the px3. I couldn’t be happier.

Thanks Guy. I forgot you had the Sony system. The newer system has peculiarities causing the issue. I have gotten use to it and really like the PX6 over the PX3 like you.

Sent from my SM-N960U1 using Tapatalk

Phoenix Android Radio 4th Gen PX6

Nerdles1

Full Access Member

BDF

Full Access Member

Nerdles1

Full Access Member

nikhsub1

FRF Addict

Jonnie510

Active Member

ROBERT F HAVENS

Full Access Member

ROBERT F HAVENS

Full Access Member

ROBERT F HAVENS

Full Access Member

Guy

FRF Supporting Member

ROBERT F HAVENS

Full Access Member

Similar threads

Members online

Forum statistics

Latest posts