What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NHbeast

Full Access Member
Joined
Jul 11, 2018
Posts
275
Reaction score
197
Location
Merrimack Valley
Changed the oil/filter and rotated the tires...those suckers are heavy.

Done shade tree (in parking lot with tree) mechanic style.
 

Badgertits

FRF Addict
Joined
Jan 24, 2019
Posts
2,730
Reaction score
2,376
Location
Ma
Installed a Swarf works license plate bracket to open up the IC grill for more air flow. Unfortunately I forgot I had inadvertently tried to screw a plate in @ the top when purchased new mistaking the rivets for holes (actually didn’t really look hard just assumed & you know what they say bout that) - so tried drilling em out but they were spinning too much to make it happen. Plan on pulling out & squishing rivet heads flat then sawing off carefully or just removing bumper & punching out @ which point may as well get it done in Linex.

The swarf plate bracket is top notch - and should be for the price. On the fence on whether to leave plate as-is or add a black “raptor” frame w/ it

View attachment 128109

DFAE0C58-81B9-4435-9AB8-F4FE707DDBEF.jpeg

F28B3789-2FCF-4E65-A0A7-4E9B7907314A.jpeg
 

Yoshi

Full Access Member
Joined
Aug 15, 2018
Posts
811
Reaction score
838
Location
Cornholio, MN
Installed a Swarf works license plate bracket to open up the IC grill for more air flow. Unfortunately I forgot I had inadvertently tried to screw a plate in @ the top when purchased new mistaking the rivets for holes (actually didn’t really look hard just assumed & you know what they say bout that) - so tried drilling em out but they were spinning too much to make it happen. Plan on pulling out & squishing rivet heads flat then sawing off carefully or just removing bumper & punching out @ which point may as well get it done in Linex.

The swarf plate bracket is top notch - and should be for the price. On the fence on whether to leave plate as-is or add a black “raptor” frame w/ it

View attachment 128109

View attachment 128110

View attachment 128111
FYI. If you remove the bumper grill, the clips that hold it on bend and break off, you can't buy the clips separately, you have to buy a new bumper grill. I found out the hard way when I removed it to install ppf on my bumper.
 

Mbdurham

Full Access Member
Joined
May 10, 2019
Posts
499
Reaction score
516
Location
Georgia
Had the Eibach springs installed! Thanks Nick@Apollo-Optics

It’s is perfectly level per my both my iPhone level and traditional level on the bed as well as running boards. I measured not in the driveway but in my garage. Front ground to fender measurement is now 42” and rear is 41 3/4” I am sure they will settle some.

Sorry Can’t remember what front measurement was before I measured a while back and thought I took a pic but was mistaken.


Innov8s will be going on next week [emoji16]

1f652b465390ead5262d24e552a342e7.jpg
f1fa28157bc63c81e6245067ceaaa758.jpg5cba09b1bddeb5838a0468623e83de5d.jpg


Sent from my iPhone using Tapatalk Pro
 
Last edited:
Top