What did u do to your raptor today?

ogdobber said:

Here
http://www.shocksecurity.com/



Sent from my iPhone using Tapatalk Pro

Click to expand...

Thanks for the share. LOL the margins for those nuts must be big for $189. Nevertheless, I am ordering a set where I don’t have a testimony like those on their website. I would lose my mind if someone stole my KING shocks.

Thanks I had the name wrong, I got the 6 piece set which is 4 locks which does 2 bolts and nuts and two keys for tightening them down. Don't think I really need them on the fronts. Still cheaper than my insurance deductible. Go to there Facebook page may have a discount code.

Some Day’s you just got to take a snap shot!!! So Bad Ass!!


Sent from my iPhone using Tapatalk

ogdobber said:

Here
http://www.shocksecurity.com/

Click to expand...

I purchased these a couple years ago. They do not working on the ICON RXT shocks. These use a different nut that holds the stabilizer bar. They do fit on the bottom as that was the only place I was able to install them. Well they got so beaten to death when off-roading, that when I needed to take my shocks off for a rebuild, they were so mangled that we had to take a cut-off wheel to them and cut them off. Plus they rust like crazy. I even sprayed them with several coats of clear-coat as others also stated issues of rust but getting beaten didn’t help the matter.

N/A, V8, powerhouse that will make any woman cream her pants.

Drove it onto four home made ramps.
Bought a 12' 2x10 pressure treated
Cut 4 - 2' and 4 - 1" lengths
Eased the front edges, sanded
Screwed together
can be made taller by adding another one footer beneath.
Makes crawling around under the truck more comfortable
May get a creeper next...
(best to be in 4A when ascending) DAMHIK

4A sounds suspiciously Gen2..... lol

Marcus85 said:

View attachment 126705 N/A, V8, powerhouse that will make any woman cream her pants.

Click to expand...

What exhaust? Headers too?

NHbeast said:

Drove it onto four home made ramps.
Bought a 12' 2x10 pressure treated
Cut 4 - 2' and 4 - 1" lengths
Eased the front edges, sanded
Screwed together
can be made taller by adding another one footer beneath.
Makes crawling around under the truck more comfortable
May get a creeper next...
(best to be in 4A when ascending) DAMHIK
View attachment 126706

Click to expand...

what did you need to do under your GEN 1?

SVTTrooper said:

what did you need to do under your GEN 1?

Click to expand...

Change oil, fluid film, Ck my Gen 2 transmission fluid level.
Have a party...