Load E Tire - Pressure Question

rayofsi · Jul 20, 2019

Just swapped over to new wheels/tires
What do people run for Load E tires?
I have 35x12.5R18

Thanks!

Badgertits · Jul 20, 2019

Probably a lot higher than you’re used to. Call the manufacturer

NASSTY · Jul 20, 2019

I'd try 38-40 psi. They ride gets pretty firm with more than 40 psi. But I'd air up if I planned on towing.

BAJA1K · Jul 20, 2019

I am running 37-38 front and 35-36 rear on general grabber x3. I tested a lot of different pressures and these seem the best for overall ride comfort. Good luck.

rayofsi · Jul 20, 2019

BAJA1K said:
I am running 37-38 front and 35-36 rear on general grabber x3. I tested a lot of different pressures and these seem the best for overall ride comfort. Good luck.

Thanks! I have the grabber a/tx

SilverBolt · Jul 21, 2019

Do a chalk test. That will tell you the correct pressure for the tires on your truck.

Nesc204 · Jul 21, 2019

If u below 60 psi the tread wears very fast. BF Goodwich will also tell you that. I liked the K1s much better

NASSTY · Jul 21, 2019

60 psi will rattle your fillings loose.

Nesc204 · Jul 21, 2019

Yes 60 psi does give a stiff ride but the tires last longer. Definitely deflate them to mid upper 40s for off road. Then put back up for highway use. Otherwise buy a set of tires every 45 thousand miles

bmexline · Jul 21, 2019

I have 35" Ridge Grapplers on 17" rims which are E. I am running 32 in the rear and 38 in the front. I've tried many different pressures and am finding this to be the best ride. Those stiff sidewalls allow for lower pressures.

Load E Tire - Pressure Question

rayofsi

FRF Supporting Member

Badgertits

FRF Addict

NASSTY

FRF Addict

BAJA1K

Full Access Member

rayofsi

FRF Supporting Member

SilverBolt

Hired Gun

Nesc204

Full Access Member

NASSTY

FRF Addict

Nesc204

Full Access Member

bmexline

Full Access Member

Similar threads

Members online

Forum statistics

Latest posts