mpk1996
Full Access Member
- Joined
- Mar 5, 2013
- Posts
- 255
- Reaction score
- 153
Ok,
finally getting around to writing this post. It was recommended to me to do this combo by more than one person, and it worked out great. I had done a bunch of searches but came up with nothing on what the liners looked like or how they would attach to the truck. In the end, it was pretty simple, but its always nice to have an idea before you start a project.
There are a bunch of videos and posts on the fender install, so i wont go to much into that. They fit pretty good, but def aren't plug and play. Expect fitting and finish work to get a surface ready to paint or wrap.
I used the blue masking tape and then gorilla tape to protect the factory paint. It works good, but it is harder to judge where the body and door line is, so thats a downside. Also, the headlight area isn't perfect. took some work to get the headlights and whatnot all mounted and fit the way i wanted.
these two things will be your friend for installing the liners. Not sure how they fit with the Advanced Fiberglass fenders, im sure it would be better, but they fit pretty good with the botecs. just a little trimming for me on the outer edge of each liner.
This is the start of how they fit.
I'll continue this in a reply since i can't upload any more photos to this post
finally getting around to writing this post. It was recommended to me to do this combo by more than one person, and it worked out great. I had done a bunch of searches but came up with nothing on what the liners looked like or how they would attach to the truck. In the end, it was pretty simple, but its always nice to have an idea before you start a project.
There are a bunch of videos and posts on the fender install, so i wont go to much into that. They fit pretty good, but def aren't plug and play. Expect fitting and finish work to get a surface ready to paint or wrap.
I used the blue masking tape and then gorilla tape to protect the factory paint. It works good, but it is harder to judge where the body and door line is, so thats a downside. Also, the headlight area isn't perfect. took some work to get the headlights and whatnot all mounted and fit the way i wanted.
these two things will be your friend for installing the liners. Not sure how they fit with the Advanced Fiberglass fenders, im sure it would be better, but they fit pretty good with the botecs. just a little trimming for me on the outer edge of each liner.
This is the start of how they fit.
I'll continue this in a reply since i can't upload any more photos to this post