On board air

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wfo

FRF Addict
Joined
Sep 22, 2013
Posts
1,835
Reaction score
1,308
Location
Syracuse
Im looking into a compressor for the purpose of airing up 37s. The Viair 450P 45043 looks to be the least expensive. Is the ARB two stage necessary for 37s and worth the cost difference from the Viair? Any other options? I like to do things right the first time to save money not upgrading in the future.
 

jzweedyk

FRF Addict
Joined
Jun 30, 2018
Posts
2,317
Reaction score
4,515
Location
Moab/Winter Travel/Summer Travel
I have the twin ARB in both my Raptor and Jeep (the Jeep has 40" tires). It is expensive, but I think worth it. You can do a tank, but it only helps a little. I have one in the Jeep, but not in the Raptor. The ARB has a built-in relay so you can use the up fitter switches to turn it on. I use number 5.
 

The Car Stereo Company

aka grumpy car stereo guy
Supporting Member
Joined
Jul 8, 2012
Posts
31,737
Reaction score
21,753
Location
here, on frf
keep in mind when getting a compressor that you want to look at the duty cycle and cfm. 100% duty cycle means it can run continuous. the downfall is that its slower. the cfm is cubic feet per minute. how much air it can push through. for a single vehicle you can get away with a 33% duty cycle most of the time. a 33% duty cycle basically means after 20 min, the compressors need to cool down for 40 min. they tell you max run time. mine are 33% duty cycle but i have 4 compressors and 10 gallons of air. i push 10cfm and can air up 6 trucks from 20 to 44psi in the 20min before the cool down time. my system is overkill but as a support truck for the ROC events, a lot of people dont have air so i planned it to be able to air up other trucks
 
OP
OP
Wfo

Wfo

FRF Addict
Joined
Sep 22, 2013
Posts
1,835
Reaction score
1,308
Location
Syracuse
keep in mind when getting a compressor that you want to look at the duty cycle and cfm. 100% duty cycle means it can run continuous. the downfall is that its slower. the cfm is cubic feet per minute. how much air it can push through. for a single vehicle you can get away with a 33% duty cycle most of the time. a 33% duty cycle basically means after 20 min, the compressors need to cool down for 40 min. they tell you max run time. mine are 33% duty cycle but i have 4 compressors and 10 gallons of air. i push 10cfm and can air up 6 trucks from 20 to 44psi in the 20min before the cool down time. my system is overkill but as a support truck for the ROC events, a lot of people dont have air so i planned it to be able to air up other trucks
Thanks for the response Noah, I wasn’t sure if you were still around.
 
D

Deleted member 12951

Guest
HPA or Powertank not an option? Much faster... unless you have 4 compressors!

Yes faster as a single air but the OP asked about on-board not portable air. Plus HPA, Powertank or Smittybilt all cost everytime you need to fill. On-board refills do not
 

Kahuna

THE MORE YOU PLAY WITH IT, THE BIGGER IT GETS
Joined
Aug 31, 2014
Posts
870
Reaction score
794
Yes faster as a single air but the OP asked about on-board not portable air. Plus HPA, Powertank or Smittybilt all cost everytime you need to fill. On-board refills do not

Thanks for clarifying for me. Should I self flagellate or is shutting my fool mouth adequate? :D
 

The Car Stereo Company

aka grumpy car stereo guy
Supporting Member
Joined
Jul 8, 2012
Posts
31,737
Reaction score
21,753
Location
here, on frf
Thanks for the response Noah, I wasn’t sure if you were still around.
im always here. not the post ***** i used to be though. haha.

tanks serve their purpose and very well, but as rick stated, you have limited supply. depending on how often you use it, it may or may not be what you want. since i air down up multiple times a year, a tank isnt the best option for me. however it could work out well for you.

also keep in mind, air compressor companies will rate their cfm under no load (no pressure in the tire for your application) some compressors drop significantly under 20-40psi. and drop more at higher psi, but since this is only for tires, the higher numbers wont matter. just the 20-40psi cfm rating
 
Top