Chiefapple
Full Access Member
95k. Picked it up at 55k. Previous owner was a boat enthusiast so I’m pretty sure it spent a lot of time towing shit.
Sent from my iPhone using Tapatalk
What did u do to your raptor today?
- Thread starter CAbimmer
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
95k. Picked it up at 55k. Previous owner was a boat enthusiast so I’m pretty sure it spent a lot of time towing shit.
Sent from my iPhone using Tapatalk
Gary E
Full Access Member
2014 with 32K on original springs and tires with 8/32" tread remaining currently sits at 42 3/4", so with new KO2's it would be sitting at 43 1/4". With your Deaver +3 that's +1 1/4" difference which is about right.
Chiefapple
Full Access Member
Right. Except I had a 1” drop shackle also. So it should be at stock. Like I said though. My stock height when I picked it up was 43.5-44.0”. When I measured it last week it was 42.5-43.0”. So I guess it was closer to an inch of sag since I picked it up.
Sent from my iPhone using Tapatalk
Chiefapple
Full Access Member
Any thoughts on how to get this out. Last cylinder on drivers side top.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
allinon72
Full Access Member
Any thoughts on how to get this out. Last cylinder on drivers side top.
Sent from my iPhone using Tapatalk
I would let some PB Blaster soak in the hole for several hours and use a 5/8" bolt extractor in the kit below. Good news is on that particular plug location, you don't need any swivels so you can get some torque on it. There should be room for a breaker bar if needed.
https://shop.advanceautoparts.com/p...xzb7fP9SAuPfiFaDR8ZJ5Jmc2nojuELxoCUiEQAvD_BwE
Thomas_JohnDoe
Full Access Member
Put the 37’s back on. Found my driver side tie rod was very loose on the Camburg clevis. Disassembled that, used red locite and got it fixed. Cleaned all the grease from the ripped CV boot that was everywhere
And it looks like my front diff is leaking
At least your front housing is not cracked .... with 30K
speedfourfan
Member
- Joined
- Sep 28, 2016
- Posts
- 13
- Reaction score
- 44
I installed a Corsa xtreme today that I got a great deal on from Rick@freedommotorsports. I have ran several different brands and set ups of other exhausts and I can can say without a doubt this is the best! I should have just went with corsa right away and saved myself a bunch of time and money.
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
D
Deleted member 12951
Guest
How in the hell did that happen, its covered by skid plate?
That needs some tweaking. It should line up with the body line somewhat
I installed a Corsa xtreme today that I got a great deal on from Rick@freedommotorsports. I have ran several different brands and set ups of other exhausts and I can can say without a doubt this is the best! I should have just went with corsa right away and saved myself a bunch of time and money.
Sent from my SM-N960U using Tapatalk
Thomas_JohnDoe
Full Access Member
no idea, poor quality... pavement queen, its been discovered by ford dealer during front diff oil change.
Similar threads
Members online
- AndrewJ
- pattmarsons
- DMacDonald
- buckmark
- Monte87
- P4SHOCAT
- hingedthinker
- 427windsorman
- Dudebrodude
- MZRaptor72
- azrapten
- Dan H
- GaoKS
- BrokenRaptor
- DTZ
- tcm glx
- dillard09
- nelsonr103
- BHook
- IOWALAW
- downforce137
- Jasonrothe
- foreignracer
- wheelman55
- MSP
- 997
- Stingray23
- yoxxi
- PNTitBLK
- alockbox
- Jetjock15
- Old-Raptor-guy
- MORaptor1
- silverf150
- HOOPSboy
- grif82
- elpechedepeche
- BadWRP
- MagnusVerMagnusson
- Snewm77
- nealhoney
- QCRappy
- Arctic
- KWB85
- NickyF25
- VFLRads
- 2437Raptor
- jond
- JohnyPython
- Spike Spiegel
Forum statistics
Latest posts
-
-
Any aftermarket exhaust available for the R?- Latest: ToadSmasher2K1
-
