GEN 2 2019 alignment

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

0-60 freak

Full Access Member
Joined
Jan 11, 2018
Posts
116
Reaction score
56
Can somebody please help ASAP, I'm putting my suspension components on as we speak and I noticed that there is not eccentrics on the front control arm bolts, it is a perfectly symmetrical round Bolt, there is a slot in the frame rail that I suppose you can loosen the bolt and use a pry bar to adjust as you need but my 2018 had the oblong shaped thick eccentric washer, has anybody experienced this? Please advise

Sent from my SM-N950U using Tapatalk
 
Last edited:

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
978
Reaction score
381
I believe you are talking about your lower control arms?

What are you doing exactly?

If lifting the truck with shocks or adding UCA,s bring the LCA, to the most outward setting and drive to your alignment shop.


Sent from my iPhone using Tapatalk
 
Top