Icon Multi-Rate Rear Leaf Spring Kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

0-60 freak

Full Access Member
Joined
Jan 11, 2018
Posts
116
Reaction score
56
How much trimming required for the 37’s? Wheel offset?


Sent from my iPhone using Tapatalk
So I've only trimmed the bare minimums to clear it right now, when the spring settle down to their final resting position I'm sure I will have to trim probably an inch more oh, but I can always trim more I can't add back that's my mentality881520d9eb11a932c1712bd4199355bf.jpg14bcbc911e184536bd8df3576b1c3c49.jpg

Sent from my SM-N950U using Tapatalk
 

Slow6

Full Access Member
Joined
Nov 13, 2017
Posts
476
Reaction score
198
Location
AK
So I've only trimmed the bare minimums to clear it right now, when the spring settle down to their final resting position I'm sure I will have to trim probably an inch more oh, but I can always trim more I can't add back that's my mentality881520d9eb11a932c1712bd4199355bf.jpg14bcbc911e184536bd8df3576b1c3c49.jpg

Sent from my SM-N950U using Tapatalk
I’ll keep watching an see how much more trimming is required...

Thanks


Sent from my iPad using Tapatalk
 

xgardx

Full Access Member
Joined
May 19, 2017
Posts
170
Reaction score
76
Location
CLE OH
So I've only trimmed the bare minimums to clear it right now, when the spring settle down to their final resting position I'm sure I will have to trim probably an inch more oh, but I can always trim more I can't add back that's my mentality881520d9eb11a932c1712bd4199355bf.jpg14bcbc911e184536bd8df3576b1c3c49.jpg

Sent from my SM-N950U using Tapatalk


Is this while just sitting on flat ground and it runs that much, or is that with any amount of compression on the front corners?
 

0-60 freak

Full Access Member
Joined
Jan 11, 2018
Posts
116
Reaction score
56
Is this while just sitting on flat ground and it runs that much, or is that with any amount of compression on the front corners?
I have no idea, as mentioned I have only trimmed the bare minimums, I will keep trimming as needed

Sent from my SM-N950U using Tapatalk
 

OffroadAlliance.com

Supporting Vendor
Supporting Vendor
Supporting Member
Joined
Mar 10, 2015
Posts
1,766
Reaction score
937
Location
Boston, MA
We've still got a few sets left in stock. $1399 shipped within the lower 48 states. Give us a call and we'll get you taken care of.


Ph: 888-466-8991


IcbDqwB.jpg
 

Asinine

Active Member
Joined
Mar 2, 2018
Posts
85
Reaction score
34
Now that my Icons on 1 have settled after 1,000 miles, I'd like to eliminate the rake. What's the best and/or suggested option -- lift up the front or lower the rear? Sitting at 43" in rear and 40.75" in front.

No plans for 37s at this time, but hey, anything is possible.
 

xgardx

Full Access Member
Joined
May 19, 2017
Posts
170
Reaction score
76
Location
CLE OH
Now that my Icons on 1 have settled after 1,000 miles, I'd like to eliminate the rake. What's the best and/or suggested option -- lift up the front or lower the rear? Sitting at 43" in rear and 40.75" in front.

No plans for 37s at this time, but hey, anything is possible.

All depends on what you want / are going for...

A drop shackle in the rear would be a low cost / easy install option. If you want the front to remain the same height/ rise feel.

If you want the front higher, a collar lift of 1.5” wouldn’t be bad, but the ride stiffness will increase some.

Or go with Geisers like I did. Expect a 2.5”+ lift to the front once settled. Ride is slightly stiffer (but in a good way, since the springs have a progressive rate). Wheel wells are looking a little empty now though, lol. I’m holding off the urge to fill them with 37s myself
 

Asinine

Active Member
Joined
Mar 2, 2018
Posts
85
Reaction score
34
All depends on what you want / are going for...

A drop shackle in the rear would be a low cost / easy install option. If you want the front to remain the same height/ rise feel.

If you want the front higher, a collar lift of 1.5” wouldn’t be bad, but the ride stiffness will increase some.

Or go with Geisers like I did. Expect a 2.5”+ lift to the front once settled. Ride is slightly stiffer (but in a good way, since the springs have a progressive rate). Wheel wells are looking a little empty now though, lol. I’m holding off the urge to fill them with 37s myself

I've got the resi FOX's up front, so it's simply turning the adjustment collar to add height; they're already at the lowest setting. If I go that route, I'll add UCAs to address the geometry.

Jacked up the front -- looks great with the extra inch.
Added weight to the rear -- looks great without the extra inch.

I'd like a little extra height for trips to the snow, but that's a small percentage of what I drive annually. Curious what others are doing with Icons and still running 35s.
 
Top