What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Buzzard2

Full Access Member
Joined
Mar 17, 2018
Posts
447
Reaction score
268
Location
Sincity
Removed the pre-run bar and 20" curved light that was installed by the first owner. Now looking for the right bumper upgrade to get rid of the stock, but white, bumper. Not my favorite thing to look at.

View attachment 123862

View attachment 123863

Looks better with the prerun bar removed IMHO, you could get the white bumpers Powder coated black until you decide on a new bumper.

mlp961b.jpg
 

Racer14

Member
Joined
Jul 8, 2012
Posts
24
Reaction score
24
Location
Inland Empire
Yes, black bumpers look so much better. Just need to decide between ordering an ADD Venom R or Evil Abaddon. Thinking about black mirror caps, too.
 

siooss

Full Access Member
Joined
Dec 29, 2012
Posts
326
Reaction score
614
Location
Florida
Replaced spark plugs, ignition coils, and wires; torqued everything to spec, dielectric grease inside boots and connectors; good lord, took me all day at my skill level!
The plugs behind the shock mounts on both sides took some black magic fuckery to get out.
The rest pretty easy, only broke one of the red clips on the ignition wire connector, rats, but still able to wedge a piece of clip in slot to lock it tight.
 
Top