GEN 2 Front Fender Vents | Carbon Fiber $$$ NOW AVAILABLE FOR PURCHASE $$$

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sharkman

Active Member
Joined
Feb 28, 2019
Posts
97
Reaction score
37
Location
Southern California
Please post pix for the side vents and carbon hood on a gray '19 raptor please. I am so close to placing the order, but not sure if the contrast is enough to justify the expense.
 

Xtinct

Full Access Member
Joined
Jan 14, 2017
Posts
383
Reaction score
249
Location
Nebraska
ALSO, how hard is it to install the hood and the side vent pieces without breaking the OEM ones or the CF ones?

I just removed both. The side vents are easy to get to and remove. The hood vent is a PIA. It has 6 nuts under the hood insulation, you can reach about 5 of the plastic clips too from underneath, but it has 16.... yes 16 fasteners in total. Took a couple hrs to carefully remove. They also tape the back side of it down in-case 16 fasteners were not enough....

Demolished a couple fasteners removing them. Ford says the clips are only available if you buy the entire new grill for $200.

Anyone have a source for the hood vent plastic clips?
 

Xtinct

Full Access Member
Joined
Jan 14, 2017
Posts
383
Reaction score
249
Location
Nebraska
Thank you for your orders everyone, we greatly appreciate your business! :happy107:

Couple questions:

1) What size 2x2 twill is the carbon fiber?

2) Can you make the side vents in full carbon fiber, with no fiberglass for added strength and lighter weight?

3) Do you sell or know where we can get replacement plastic hood vent clips if the factory clips break while removing the hood vent?

Thanks!
 

waveslayer

Full Access Member
Joined
Aug 30, 2018
Posts
607
Reaction score
397
Location
CA
So what are the benefits? Just looks? Curious if that's all it does, buy some stick on over molds

My wife thinks I only have 3 guns
 
Top