Now there is interface for the B&O system

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dhmcfadin

Full Access Member
Joined
Mar 27, 2018
Posts
553
Reaction score
240
Damn. If you were closer I would offer to help... or hang out and drink beer.

Haha, thanks. Ill definitely post an album of build pics when I start working on it. Still waiting on a couples pieces of equipment to come in.
 

Quaesta

Full Access Member
Joined
Jun 13, 2018
Posts
623
Reaction score
383
Wow that is going to be sick. Where are you planning to put the subs?
 

Quaesta

Full Access Member
Joined
Jun 13, 2018
Posts
623
Reaction score
383
That’s bad ass. Can’t wait to see your finished product.
 

gijosh28

Full Access Member
Joined
Nov 15, 2017
Posts
203
Reaction score
79
So I contacted them about getting them to build me a box. The one I have now is just plain black carpet. They want a lot of money for those boxes.
 

dhmcfadin

Full Access Member
Joined
Mar 27, 2018
Posts
553
Reaction score
240
Now there is interface for the B&O system

So I contacted them about getting them to build me a box. The one I have now is just plain black carpet. They want a lot of money for those boxes.



They aren’t cheap but you are paying for craftsmanship and design. You don’t earn 19 world championships by accident.


Sent from my iPhone using Tapatalk
 
Last edited:

nah_tan

Full Access Member
Joined
Jun 4, 2017
Posts
92
Reaction score
50
Dumb question but how do I interface with my audiocontrol amp via analog? Do I need x2 mono RCA to a stereo RCA? The Zen outputs a mono RCA for + and - for each speaker channel and my Audiocontrol has 6 inputs .

View media item 14090
 

dhmcfadin

Full Access Member
Joined
Mar 27, 2018
Posts
553
Reaction score
240
Dumb question but how do I interface with my audiocontrol amp via analog? Do I need x2 mono RCA to a stereo RCA? The Zen outputs a mono RCA for + and - for each speaker channel and my Audiocontrol has 6 inputs .

View media item 14090

Nothing is mono. Everything is stereo. Each rca is a channel left or right. A lot of the RCA’s on the zen are duplicates.

ccdd0ca16105ce532934df9663188258.jpg

As far as RCA’s to the 6.1200, you only need one set going to the amp and you want to select the SUM switch on channels 3/4 and 5/6. Music is recorded in left and right. Not front, rear, center. It’s stereo. Left and right. The front channels coming out of the zen (ch 1 and 2 or 3 and 4 or 5 and 6 in the diagram above) are full frequency signals from 10 hz to 40k hz and are identical. You only need 2 channels to go into your 6.1200.

a78ee7e711cbd1d5c911dad3ef85207e.jpg
 

nah_tan

Full Access Member
Joined
Jun 4, 2017
Posts
92
Reaction score
50
Nothing is mono. Everything is stereo. Each rca is a channel left or right. A lot of the RCA’s on the zen are duplicates.

ccdd0ca16105ce532934df9663188258.jpg

As far as RCA’s to the 6.1200, you only need one set going to the amp and you want to select the SUM switch on channels 3/4 and 5/6. Music is recorded in left and right. Not front, rear, center. It’s stereo. Left and right. The front channels coming out of the zen (ch 1 and 2 or 3 and 4 or 5 and 6 in the diagram above) are full frequency signals from 10 hz to 40k hz and are identical. You only need 2 channels to go into your 6.1200.

a78ee7e711cbd1d5c911dad3ef85207e.jpg
It sall hooked up and Ive started tuning and WOW what a difference! My only sort of issue is that the input from the Zen is very low . I have the input cranked almost all of the way up in the Audio Control DSP APP and my outputs turned up and it gets plenty loud just under full volume. Would it matter if I hooked up more than one output from the ZEN to the amp? Currently I have outputs 1-2 from ZEN (right front/left front) into Audiocontrol Front (1/2) and i am getting a full range signal but it is very low. I cant imagine more inputs would do anything different as they are line level. Im going to try sending the rear doors from the ZEN out to the Audiocontrol amp and see if there is a difference. I am unable to get it to clip when setting up with pink noise source and truck volume maxed out with input maxed out in the DSP.
 
Top