Baja Designs: General Discussion Thread - GEN 2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,211
Wiring up the lp6's this weekend. The BD harness is to short after the Y split for A pillar, so I'm soldering in an extension. This has to be enough light for now...I haven't even seen dirt yet, just planning for a fun summer once the trails melt.

How did the wiring install go?

Baja Designs
www.bajadesigns.com
 
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,211
Sorry if it’s been asked a million times, any news on the release date of the DOT approved fog lights? I know it was supposed to be soon.

I’m waiting impatiently to order...haha.

No worries! June is our current ETA. I hope to post another update towards the beginning of May
 
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,211
So..
I have $1200 worth of Baja lights in my raptor front bumper. Turkey season came in in Va and I have been getting up at 4am and driving to my turkey spots. Nobody on the back roads much so you get a chance to burn them...AMAZING....when on there are animals everywhere...deer rabbits possums raccoons...I even saw a skunk...turn the lights off and they are gone. You would never know they were there...WOW...I guess worth all that money


Great to see you're getting some use out of the lights! Thanks for sharing

Baja Designs
www.bajadesigns.com
 
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,211
FULL LASER ONX6 LIGHT BARS

We are proud to announce the industry's first full laser light bar! The OnX6 Full Laser features 6 laser diodes per 10-inch section. Paired with our High Speed Spot optics, these laser chips produce an extremely tight 1.5° pattern and are capable of throwing light 350% farther than current premium LED offerings.

Baja Designs | OnX6 Full Laser Light Bar

46946043344_7efeb82d5e_b.jpg


LASER UPGRADE PROGRAM
SEND IN YOUR CURRENT ONX6 LED LIGHT BAR TO UPGRADE THE CIRCUIT BOARD TO NEXT GENERATION LASER TECHNOLOGY.
PLEASE GIVE US A CALL TO GET STARTED:

1-800-422-5292

10" HYBRID LASER/LED CIRCUIT BOARD: $650 PER 10-INCH SECTION
- 2 LASER CHIPS, 4 LEDS
- LUMENS: 7,760
- WATTAGE / AMPS: 95W / 6.9A
- SIZES: 10", 20", 30", 40" & 50"

10" FULL LASER CIRCUIT BOARD: $1,450 PER 10-INCH SECTION
- 6 LASER CHIPS
- LUMENS: 3,000
- WATTAGE / AMPS: 90W / 6.5A
- SIZES: 10", 20", 30", 40" & 50"

Baja Designs
www.bajadesigns.com
 

xmadcowx

Member
Joined
Dec 31, 2018
Posts
25
Reaction score
14
Location
Colorado
How did the wiring install go?

Baja Designs
www.bajadesigns.com

Paul deserves a raise. We have chatted a handful of times over the phone and via email, his help and patience is much appreciated.

Took the truck out last night, it's bright as expected, but I will be adjusting the passenger A pillar angle to face slightly outwards to combat the side leds from shining directly at me, maybe even paint over that section if necessary. Last thing to do is to follow up with Paul on wiring up a 2nd relay to protect the light incase both upfitters (low and hi) are triggered at the same time.

At first I thought the lp6's would be obnoxious but I feel the larger light fits the trucks size just fine and they have grown on me. Lots of turning around as I walk into Home Depot for 1 more look.
 

Spectragod

FRF Supporting Member
Supporting Member
Joined
Mar 16, 2019
Posts
795
Reaction score
1,847
Location
Dayton Ohio
Paul deserves a raise. We have chatted a handful of times over the phone and via email, his help and patience is much appreciated.

Took the truck out last night, it's bright as expected, but I will be adjusting the passenger A pillar angle to face slightly outwards to combat the side leds from shining directly at me, maybe even paint over that section if necessary. Last thing to do is to follow up with Paul on wiring up a 2nd relay to protect the light incase both upfitters (low and hi) are triggered at the same time.

At first I thought the lp6's would be obnoxious but I feel the larger light fits the trucks size just fine and they have grown on me. Lots of turning around as I walk into Home Depot for 1 more look.

Pics? Because I don't know if I want LP6's or 9's.
 

zombiekiller

OG BooBooRunner
Joined
Sep 24, 2017
Posts
2,793
Reaction score
3,831
Location
New Orleans
Paul deserves a raise. We have chatted a handful of times over the phone and via email, his help and patience is much appreciated.

Took the truck out last night, it's bright as expected, but I will be adjusting the passenger A pillar angle to face slightly outwards to combat the side leds from shining directly at me, maybe even paint over that section if necessary. Last thing to do is to follow up with Paul on wiring up a 2nd relay to protect the light incase both upfitters (low and hi) are triggered at the same time.

At first, I thought the lp6's would be obnoxious but I feel the larger light fits the trucks size just fine and they have grown on me. Lots of turning around as I walk into Home Depot for 1 more look.

Don't paint them. Just use a couple strips of vinyl wrap cut to size so that if you ever decide to relocate them, you don't have to worry about stripping paint or new lenses.
 

xmadcowx

Member
Joined
Dec 31, 2018
Posts
25
Reaction score
14
Location
Colorado
Good call on the vinyl. I'll ask the local shop if they have any scrap to cover the insides of each to keep it out of the driver and passenger eyes.

I'll upload pictures when I get home. Doing this on mobile is getting on my nerves
 
Top