What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

im33303

Full Access Member
Joined
Aug 31, 2017
Posts
106
Reaction score
37
Installed the Gj Motorsport 3 brake light. Amber's are wired to uplifter, clear comes on when in reverse, bed switch, and cabin switch.
Do you have a picture of the red running lights only?
Trying to see how bright are they in comparison to stock ones
 

FordPerf Addict

FRF Addict
Joined
Aug 24, 2016
Posts
1,321
Reaction score
521
IMG_9393.jpg
Then the next day got it stuck in the clay and had to dig it out [emoji23]
I could not throttle out of there because it had me sliding laterally into a river.. either way I took my time and got it out just fine

Then spent 2 hours power washing the outside and wheel wells and also re cleaning my floor mats and some plastic on the inside


Sent from my iPhone using Tapatalk
 

JohnyPython

FRF Addict
Joined
Oct 28, 2018
Posts
8,737
Reaction score
35,637
Location
Canada
Finally got some decent weather after a long Canadian winter. Washed yesterday and decided to take a look at the spare.

It was pretty filthy. Gave it a power wash. Had a streak of Line-X on the rubber and it came right off. I’ll give the underside a spray too.

No wheel weights and no TPMS.

80027017-25C6-470F-A229-9ADFA2DEEB61.jpeg
D8797ACC-8D4C-47E3-8761-7A13E1A24D60.jpeg
 

Wfo

FRF Addict
Joined
Sep 22, 2013
Posts
1,833
Reaction score
1,306
Location
Syracuse
View attachment 120944
Then the next day got it stuck in the clay and had to dig it out [emoji23]
I could not throttle out of there because it had me sliding laterally into a river.. either way I took my time and got it out just fine

Then spent 2 hours power washing the outside and wheel wells and also re cleaning my floor mats and some plastic on the inside


Sent from my iPhone using Tapatalk
Finally got some decent weather after a long Canadian winter. Washed yesterday and decided to take a look at the spare.

It was pretty filthy. Gave it a power wash. Had a streak of Line-X on the rubber and it came right off. I’ll give the underside a spray too.

No wheel weights and no TPMS.

View attachment 120945
View attachment 120946
Way to cheap out ford. Tmps and balancing would have cost too much. Wtf
 

JohnyPython

FRF Addict
Joined
Oct 28, 2018
Posts
8,737
Reaction score
35,637
Location
Canada
Way to cheap out ford. Tmps and balancing would have cost too much. Wtf

At least balance the spare. Finish the job FFS.

Don’t care about TPMS - more of a pain sometimes. The trade off is 5 bead lock wheels lol
 

Boost_it638

Full Access Member
Joined
Mar 29, 2017
Posts
128
Reaction score
135
Location
New Jersey
Do you have a picture of the red running lights only?
Trying to see how bright are they in comparison to stock ones
20190325_205044.jpg





How did you route the wiring? Did you have to remove the head liner?

Nope didnt have to touch the head liner. Just removed the rear corner passenger trim piece, snaked the harness threw the holes of the brake light to there with a wire coat hanger. Then ran the harness under all the side trim of the passenger side up to the front passenger kicker panel. The wires to tap to the reverse and pass threw for the uplifter is located there.
 

FordPerf Addict

FRF Addict
Joined
Aug 24, 2016
Posts
1,321
Reaction score
521
57548582287__22871F0D-A2F1-4890-8E4A-BADCAC275DC0.jpg
Stuck a blind spot mirror on.. not sure why this ain’t stock. Blind spot is terrible over my left shoulder and sometimes the sensors don’t pickup small cars or sedans right next to my B pillar. Not sure if anyone else notices


Sent from my iPhone using Tapatalk
 
Top