GEN 2 20” Wheel Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,391
Reaction score
3,055
Location
Houston, TX
Nick is the man!!! He got me my wheels. I have trail graps on mine. 35x12.50x20

At full lock I get a small amount of rubbing. Nick can this cause a problem if I don’t do anything about it? Love the wheels. Thanks

Appreciate the kind words! And glad we could help get you setup! The minor rubbing isn't a big deal as long as it's at parking lot speeds, which it usually is at full lock. I wouldn't worry much about it, however, if it did bug you enough, a little fender trimming would solve the problem.

Does anyone know which wheels are on this truck?

View attachment 119732

Those are Fuel Rampage 2-piece wheels. Pictured looks to be the 22" version.
 

ameration

Full Access Member
Joined
May 29, 2018
Posts
197
Reaction score
103
Location
Ohio
Thanks Nick.
Anyone running the 35x12.5x20 with a +12mm off set in KO2’s or Nitto Ridge Grapplers without leveling that can help answer if you have rubbing at full lock??
Thanks!!

I have the VR601’s with 35x12.50R20 Mastercraft Courser MXT’s and had no rub at stock height.
 

Erjdrvr

Full Access Member
Joined
Dec 10, 2018
Posts
265
Reaction score
271
Location
Indy
Lead foot grey and it is not available anymore. Wheels are 1.3 inches pushed out.
I thought 601's & 602's only would stick out another 0.91" over the stock offset?

Sent from my SM-N960U using Tapatalk
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,250
Location
Ashburn, VA
34mm (OEM offset) - 12mm (601s and 602s offset) = 22mm or 0.866142 inches.

601s and 602s is a 9inch wide wheel which means .25 inches will be on either side. So .25" + 0.866142" = 1.116

so the edge of the wheel will be pushed out 1.116" when compared to oem wheel.

I was wrong about 1.3" sorry.

I thought 601's & 602's only would stick out another 0.91" over the stock offset?

Sent from my SM-N960U using Tapatalk
 

Aventador22

Full Access Member
Joined
Feb 27, 2013
Posts
175
Reaction score
34
Anyone have experience regarding the Nitto RG 325/60/20 vs 35/12.5/20 with the VenomRex 601? Trying to figure out which ones to go with that will give it an aggressive poke without too much rubbing.
 

500mag

Full Access Member
Joined
Mar 22, 2019
Posts
528
Reaction score
412
Location
Georgia
Top