Stage 2/2+ Hard Parts and Off The Shelf Maps Now Available!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Huttomitch

Member
Joined
Apr 10, 2018
Posts
10
Reaction score
13
I have some lights mounted behind the grill (M and R automotive - https://mandronline.com/products/20...light-kit-lighting-system?variant=44400389252 ). Does the Cobb intercooler use more space behind the grill?

I took some measurements on a truck with a Cobb intercooler on and found that there is approximately 2.15" between the back of the grill and the intercooler core below the Ford logo and 2.35" above the Ford logo. So you can take a look at how far back your lights go behind the grille and see if it will fit with them on.
 

texasflyer

Full Access Member
Joined
Oct 23, 2017
Posts
70
Reaction score
71
Is the stage 2 map available to those who already have an aftermarket interoooler and AIRBOX mod? Or must you buy these items from COBB it order to have access to that map?

If you have the COBB Accessport, you should be able to download any of the OTS maps for free from COBB's website.
 
OP
OP
COBB Tuning

COBB Tuning

Supporting Vendor
Supporting Vendor
Joined
Nov 19, 2018
Posts
246
Reaction score
545
Location
Austin, TX
I have some lights mounted behind the grill (M and R automotive - https://mandronline.com/products/20...light-kit-lighting-system?variant=44400389252 ). Does the Cobb intercooler use more space behind the grill?

It does take up a lot of the space behind the grille. Use Huttomitch's measurements above to see if it will work.

Is the stage 2 map available to those who already have an aftermarket interoooler and AIRBOX mod? Or must you buy these items from COBB it order to have access to that map?

If you have an Accessport, you have access to all of the off the shelf maps! There are no part purchases required.

I feel like the fat kid that no one wants on their team. When are we 2019 guys going to get included?

Sorry for the delay. We're looking to have support out before the summer.

Kyle@COBB
 

BIGDJE

Full Access Member
Joined
Oct 30, 2018
Posts
596
Reaction score
507
Location
OC, CALI
Any word on CARB approval, estimated timeline for any of the stages?


from my understanding reason why whipple kit is carb approval or one of is you dont keep your stock tone and only load on a tune of what they give you. you cant put it on a dyno and adj a whipple tune

would need a new handheld aka cobb accessport to tune it. if i am correct then cobb will never be card approval but i could be all wrong
 

K1llD4shN1n3

Full Access Member
Joined
Jul 27, 2016
Posts
546
Reaction score
330
Location
Colorado
Anyone install the Cobb FMIC with a bumper that doesn’t support the ACC sensor?


Sent from my iPhone using Tapatalk
 

RGVRaptor

Full Access Member
Joined
Apr 19, 2013
Posts
121
Reaction score
85
Location
South Texas
Ok, so here’s an update. COBBs install instructions are decent until it gets to the part where you need to trim the grill. I’m sitting here with my truck ripped apart absolutely STUMPED on what to do next. Not good....

I’m stuck at “unplug the ambient air temp sensor from grill”.... let’s not even get in to the trimming instructions.
 

mp_tx

Full Access Member
Joined
Nov 23, 2018
Posts
156
Reaction score
122
Location
Austin, TX
Ok, so here’s an update. COBBs install instructions are decent until it gets to the part where you need to trim the grill. I’m sitting here with my truck ripped apart absolutely STUMPED on what to do next. Not good....

I’m stuck at “unplug the ambient air temp sensor from grill”.... let’s not even get in to the trimming instructions.


I don’t get it—seems clear to me. Do you not know what the ambient air temp sensor looks like? Did you look through the instructions and google anything you did not recognize or understand? Ambient temp sensor is what gives you the outside temp. It usually affixes using a “pine cone” plastic barb. Pop it off and proceed.


Sent from my iPad using Tapatalk
 

sp2pilot

Full Access Member
Joined
Jan 27, 2017
Posts
172
Reaction score
63
Location
Hell
Anyone install the Cobb FMIC with a bumper that doesn’t support the ACC sensor?


Sent from my iPhone using Tapatalk
I was wondering the same thing. I have an ADD Pro Bolt on bumper sitting in my living room, with the ACC relocation kit that goes up in the grill..........and I was thinking about getting the Cobb FMIC and installing everything at once.

I know one of Cobbs test trucks(Ians I think?) has a frame cut bumper, but I don't know if he relocated the ACC module.
 
Top