Which Aux switch for Kenwood chase radio

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Halo Raptor

Full Access Member
Joined
Feb 12, 2019
Posts
409
Reaction score
189
Location
Monrovia, CA
2017 Gen 2. I have the 6 uplifter aux switches. I have the BD onx6 light bar to switch 1, which switch best suits the chase radio?
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,853
Reaction score
1,321
Depends on the radio you have... because every radio pulls different amperage. Which model did you go with?

You can always check the fuse rating on the radios power harness... that'll tell you what you can use.

If it has a 10 amp fuse, then you're good on upfitters 1-4.

If it has an 8 amp fuse... upfitters 1-4 still

1/2: 15 amp
3/4: 10 amp
5/6: 5 amp
 
OP
OP
Halo Raptor

Halo Raptor

Full Access Member
Joined
Feb 12, 2019
Posts
409
Reaction score
189
Location
Monrovia, CA
Depends on the radio you have... because every radio pulls different amperage. Which model did you go with?

You can always check the fuse rating on the radios power harness... that'll tell you what you can use.

If it has a 10 amp fuse, then you're good on upfitters 1-4.

If it has an 8 amp fuse... upfitters 1-4 still

1/2: 15 amp
3/4: 10 amp
5/6: 5 amp
I went with the Kenwood TK790h
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,853
Reaction score
1,321
You're going to want to hook that up to a relay/upfitter... That pulls under 25Amps while transmitting which will blow the 15A fuse. So you'll need to run a dedicated power line to a relay and trigger the relay with an upfitter.
 
Top