Can not be done w/ forscan. Its hardwired that way. You would need an external module like NavTV or other external wiring to change the hardwiring.
Forscan changes - tweak your truck
- Thread starter BajaFred
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Can not be done w/ forscan. Its hardwired that way. You would need an external module like NavTV or other external wiring to change the hardwiring.
chizchiz
Member
Hey all, noob here, but can't seem to find this specific tweak....
Is it possible to have the mirrors fold in/out when any of the homelink buttons are pressed? I have a narrow garage that I enter/exit through the garage door (pad on outside) so would be very useful if the mirrors would fold in when i pushed the homelink to drive in, and then would open again when i pushed homelink again after I pulled back out the next morning. Thoughts? And thank you in advance for the help, this forum is invaluable!
Is it possible to have the mirrors fold in/out when any of the homelink buttons are pressed? I have a narrow garage that I enter/exit through the garage door (pad on outside) so would be very useful if the mirrors would fold in when i pushed the homelink to drive in, and then would open again when i pushed homelink again after I pulled back out the next morning. Thoughts? And thank you in advance for the help, this forum is invaluable!
Don’t think so... closest is “Lincoln mirrors” but that isn’t what you want
I used the
OHP ELMconfig Forscan OBD2 Adapter with MS-Can & HS-Can Switch
on a 19' truck over the weekend and it worked to disable the auto stop/start.
My usual thought is to go with a wired connection over bluetooth or wifi whenever you can for simplicity.
Last edited:
infernoz07
Member
Is there a way to have the Cruise (on/off) be enabled all the time? Minor annoyance but pushing the button on the steering wheel at every startup is annoying and inevitably I try to engage cruise then realize it's not "on" yet. I don't see this in Forscan but am just getting my adapter today and making my list of changes for the weekend. This is one thing I miss about my GM truck, turn on the cruise button and never think about it again. Hope there is a way like with start/stop, etc. thanks!
03'Darin
FRF Addict
I updated the software to the current version and it works now. Thanks
Hawaiian Time
Full Access Member
How did you disable Auto Start Stop with ForScan?
It's in the spreadsheet... easy peasy
Hawaiian Time
Full Access Member
Similar threads
Staff online
-
GriffinAdministrator
Members online
- joeyrotorhead
- RiskTkr
- 997
- jp1seattle
- k3k0a808
- firemanjoe
- CookieMonster11b
- Hard R
- c0rehax
- pete888
- jhgrossi2004
- CREC
- Braaaaptor
- BoostCreep
- fordfreek
- HookEm
- kgreen175
- Frogger22
- grleon65
- John Michial
- Tungy001
- Griffin
- Keith88
- thatJeepguy
- Pnwrider
- never_summer
- djfecetron
- Yippie-ki-yay
- scroper
- kevo_lo
- boxer-werke
- CDN_Raptor
- TomDirt
- icecoldak
- RaptorFun
- chris51080
