Robby Woods Carbon Fiber fenders

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

06z

Full Access Member
Joined
Feb 9, 2013
Posts
503
Reaction score
589
Location
So Cal
I see you guys are doing LT in the front, what are you doing in the rear?
 

zombiekiller

OG BooBooRunner
Joined
Sep 24, 2017
Posts
2,793
Reaction score
3,831
Location
New Orleans
I see you guys are doing LT in the front, what are you doing in the rear?

Rear suspension round 1 (Now): Keeping +3 deavers. SVC bump frame and King 2.5s. SVC bypass rack, king 4.0s. 1.5" hub centric spacers. camburg mig shackles.

Rear suspension round 2 (March-ish): Sprung under with new deavers (+7 or +8), extended shackles, 2 link/reverse wishbone/anti-wrap bars (have to measure and figure out what will fit/work best), have currie lengthen axle tubes on factory rear +2 each side.

My front will be SVCs Mid Travel. 2.5CO + 3.5 bypass on each side. it's a +2.25 on each side kit. Will be installed during this round of upgrades.

The only thing that I haven't determined yet is if I'll try to squeeze some anti-rock sways into the build. I won't decide that until I get some time in the dirt.
 

TXRaptor

FRF Addict
Joined
Sep 15, 2010
Posts
1,851
Reaction score
1,044
If you're near dallas, TMX is in the middle of installing Robby's CF fenders and bedsides on my truck right now. I'm sure the fellas would let you take a peak at them if you dropped by.

Are they normally open on Saturday? I will be in Dallas for the weekend and I would like to see them in person.
 

zombiekiller

OG BooBooRunner
Joined
Sep 24, 2017
Posts
2,793
Reaction score
3,831
Location
New Orleans
What paint if any are you going to put on the CF

I'm going to talk to a painter, and also my wrap guy. Right now I'm leaning towards wrap + PPF, but am undecided. I won't go the direction of the Blue truck (as interesting as it is) because it just isn't my style. I'll most likely drive the truck around a bit to let the lines grow on me before I make a decision.

I'm currently thinking of leaving the flat part outboard of the headlights CF and the flares CF, while painting/wrapping the rest.

I'm also considering doing a CF hood vent to tie it all together, but I'm nervous about the weave matching.
 

TheButcher

Supporting Vendor
Supporting Vendor
Joined
Jan 19, 2015
Posts
239
Reaction score
333
Snap some upclose pics of the fenders when you get a chance please. Particularly the front corner above the headlight where the hood comes together. I want to see if it looks like this on yours as well (somewhat clear yet foggy at the tip, and it looks like the CF doesn't come to the very tip of the fender):

IMG_2677.JPG
 
OP
OP
ASD1

ASD1

Full Access Member
Joined
Jul 17, 2017
Posts
136
Reaction score
88
Location
Burlingame CA 94010
Snap some upclose pics of the fenders when you get a chance please. Particularly the front corner above the headlight where the hood comes together. I want to see if it looks like this on yours as well (somewhat clear yet foggy at the tip, and it looks like the CF doesn't come to the very tip of the fender):

View attachment 113735


42345143_2133260920031844_8037481517175275520_n.jpg


42389514_2133261786698424_8528432416962904064_n.jpg
 

TheButcher

Supporting Vendor
Supporting Vendor
Joined
Jan 19, 2015
Posts
239
Reaction score
333
Thanks. Those look considerably better than the Deberti I showed in the pic I posted. What are you doing for a rear bumper?


Sent from my iPhone using Tapatalk
 
Top