GJ Motorsports 3rd Brakelight

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1BAD454SS

Full Access Member
Joined
Aug 13, 2017
Posts
188
Reaction score
117
Got Antenna connected to radio Saturday morning ,the 3rd brakelight comes with good quality coax and connector, I shortened my cable to the length i needed and installed a new connector. Checked SWR this morning 1.2 ratio at 109 watts transmiting power. Anything below a 1.5 ratio is excellent . 1.5 to 2.0 is good. Higher than that not so good. be sure if you have excess coax you don't coil it up. Cut it to length and install new connector or stretch it out under the carpeting or inside the panels . Its also a Good idea to have your SWR checked after installation .

swr.jpg

head unit (1).jpg
 
Last edited:

14 BlackScrew RR

Full Access Member
Joined
Aug 27, 2017
Posts
331
Reaction score
66
Location
Chicago NW Burbs.
Tracking shows that mine should be delivered today. :party36: I went with the S2 Pro amber driving/combo left and right, and the S2 Sport white work/scene for the center.

Now if I could just get @t_j to reply to my PMs on some other work I need GJM to do...:biggrin:


>>> Now if I could just get @t_j to reply to my PMs on some other work I need GJM to do... <<<

I wish you LUCK!

TJ is Notorious about not keeping his word.
I'm speaking from experience.
I spoke to TJ over the phone a little over 3 weeks ago in discussion about ordering a set of Deavers springs with powder coat, an Icon bump stop, and the 3rd brake light.
During our discussions, I requested the he send me an invoice, so I could forward the funds to pay for these items.
In our discussions, I also reminded him that very soon I'll be going ahead with the rest of the mods of a complete set of Icon 3" shocks, both front and rear.
All in all, this is well in excess of over $10,000.00 in just parts.
To my dismay, I've yet to hear back from TJ, nor have I seen the Invoice as yet. (No! It's not in my spam folder either)
And! I must say, this is not the first time he has been tardy in getting back to me in regards to business.
Guess he is too busy to reply!!!!!!!!!!!!!!
 

NE Ford

Full Access Member
Joined
Dec 9, 2014
Posts
533
Reaction score
290
Location
Southern California
Tracking shows that mine should be delivered today. :party36: I went with the S2 Pro amber driving/combo left and right, and the S2 Sport white work/scene for the center.

Now if I could just get @t_j to reply to my PMs on some other work I need GJM to do...:biggrin:

TJ has been out of the country since the 27th and won't be back until this weekend. Please shoot me a direct message to discuss the other work you need done.
 

Clockton

Full Access Member
Joined
Sep 26, 2017
Posts
380
Reaction score
481
Location
Northern CA.
I have had issues with the light pulling loose from the cab with the OEM hardware. I sent a note to GJ describing the problem a few weeks ago and thought that I was on my own to find a solution. Today in mail arrives a note saying they had reports of the retaining clips being pulled out of the back of the cab and sent new hardware for use with the light to replace the OEM hardware.

Good stuff GJ.

Thanks
 

t_j

FRF Addict
Joined
Sep 10, 2013
Posts
2,753
Reaction score
2,310
Location
Chicago, IL
I have had issues with the light pulling loose from the cab with the OEM hardware. I sent a note to GJ describing the problem a few weeks ago and thought that I was on my own to find a solution. Today in mail arrives a note saying they had reports of the retaining clips being pulled out of the back of the cab and sent new hardware for use with the light to replace the OEM hardware.

Good stuff GJ.

Thanks


Everyone that ordered an NMO mount got replacement hardware. If you are having a problem with a none NMO light and the clips shoot us an email/pm/fb/call and we will ship you out some hardware.
 

Mspeed

Active Member
Joined
Sep 12, 2017
Posts
65
Reaction score
12
Location
Brownsville TX
I need help with pick out an antenna for my set up. I just purchased an icom 2730A dual band radio. I plan to install it in my chase rack. I'm looking for the longest range size don matter. Any ideas?
 

Booth9999

Professional basket weaver level 7
Joined
Nov 19, 2017
Posts
1,879
Reaction score
811
Location
Idyllwild
Hey t_j, need to buy a new seal for my GJ light. Had to take the light off to switch around the settings and it ripped. I left a email but i haven't heard back yet. any help would be great!
 

renegadeagle

Full Access Member
Joined
Oct 8, 2011
Posts
238
Reaction score
63
Location
Puerto Rico
Ordered the kit for my 2010 Raptor Received the kit for 2017 Raptor. Contacted 4x4 Truckleds and told me to send back everything including harness. Now received correct assembly but the connector on harness does not plug on truck.Attached photos.Almost a month between all this odysey .All the routing of cable done on truck already.Very frustrating.
For the money would have expected honestly better customer service.

Truck connector,original from OEM
to original brake light, on left 3 pins.Harness connector on right.4 cables and connector does not plug to truck.

20191005_162522.jpg

20191005_162315.jpg
 
Last edited:
Top