37's on OEM Tires (2017 or 2018 Gen 2) Anyone?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
T

Tlh235

Full Access Member
Joined
Oct 20, 2017
Posts
201
Reaction score
83
the ol' grammar mistake...i see what you did there...a tire can't fit on a tire.........you sir win the internet for today.
 

BBLV

Full Access Member
Joined
Oct 1, 2011
Posts
228
Reaction score
130
Location
Newport Beach
I have Geisers and+3 Deavers, just put on 37x12.5x17 Toyo RT's, but with a lower offset than OEM (+0, 17x9 wheels). I rub slightly on the back/inside of the front wheel wells. I don't intend to cut a thing and by the look of it I can probably get away with some heat gun bending/massaging of a little plastic. At factory offset you may not even rub - it'll be very close.
 

TXRaptor

FRF Addict
Joined
Sep 15, 2010
Posts
1,851
Reaction score
1,044
I also have Geisers, Deaver +3s and 37x12.5x17 Toyo RTs on a 17x8.5 rim with +6 offset. (factory is +34 offset which will be just over an 1" further in than mine) My fronts were rubbing slightly on both sides at full lock so I had to cut a 1" square of plastic from the inside of the inner fender well. I might do a little more in the future, but in the 200+ road miles since trimming, I have not heard it rub.

Crooked photo due to tight spot to take pic! (You can still see it...) :smile:
 

Attachments

  • IMG_3367.jpg
    IMG_3367.jpg
    58.2 KB · Views: 80
Last edited:
Top