Gen2 Raptor parts on a 17 F150

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jackrook

FRF Addict
Joined
Jun 17, 2013
Posts
1,379
Reaction score
705
Location
Bermuda Dunes, Ca
Hello folks. Upgrading my suspension on my 2017 F150. Not going to be one of those douchers who calls their truck a “Raptor conversion”. However I want to modify my truck just enough to get back on the EXO runs, which recommends their trucks be at “stock Raptor quality”.

So I’ve got my cart full right now over at Rydell parts. Just waiting to pull the trigger.

I’ll be ordering RAPTOR SPECIFIC UCA, LCA, and knuckles.

What else do I need? Sway bar? Tie rods? Etc.
 

ASD1

Full Access Member
Joined
Jul 17, 2017
Posts
136
Reaction score
88
Location
Burlingame CA 94010
17 raptor front parts will not work on a 15 up f150 / different mounting points on frame. just order some lt parts for your f150
 

shortdeck

Member
Joined
Feb 28, 2018
Posts
39
Reaction score
22
Hello folks. Upgrading my suspension on my 2017 F150. Not going to be one of those douchers who calls their truck a “Raptor conversion”. However I want to modify my truck just enough to get back on the EXO runs, which recommends their trucks be at “stock Raptor quality”.

So I’ve got my cart full right now over at Rydell parts. Just waiting to pull the trigger.

I’ll be ordering RAPTOR SPECIFIC UCA, LCA, and knuckles.

What else do I need? Sway bar? Tie rods? Etc.



https://docs.google.com/spreadsheets/d/1BqqUzT5hYti5bY3lwnSsCiRmYRcipp-dCatIAVprIuc/htmlview

Try this link. It's a list of parts need to get a Raptor suspension. It's not my list but some research I did when I was considering the same thing upgrade. Also check out Tasca Parts. Their pricing didn't seem that crazy last I looked. I wish I had a definitive answer on whether this stuff bolts right up, but my truck is a 2018. With the small body changes in the 2018, Fiberwerx didn't have fenders until recently. I didn't want to do the suspension mods without a way to do body mods.


Sent from my iPhone using Tapatalk
 
OP
OP
jackrook

jackrook

FRF Addict
Joined
Jun 17, 2013
Posts
1,379
Reaction score
705
Location
Bermuda Dunes, Ca
https://docs.google.com/spreadsheets/d/1BqqUzT5hYti5bY3lwnSsCiRmYRcipp-dCatIAVprIuc/htmlview

Try this link. It's a list of parts need to get a Raptor suspension. It's not my list but some research I did when I was considering the same thing upgrade. Also check out Tasca Parts. Their pricing didn't seem that crazy last I looked. I wish I had a definitive answer on whether this stuff bolts right up, but my truck is a 2018. With the small body changes in the 2018, Fiberwerx didn't have fenders until recently. I didn't want to do the suspension mods without a way to do body mods.


Sent from my iPhone using Tapatalk

Wow that’s some great leg work. Sure makes it easy on me!
 
OP
OP
jackrook

jackrook

FRF Addict
Joined
Jun 17, 2013
Posts
1,379
Reaction score
705
Location
Bermuda Dunes, Ca
Some of these builds are rather extensive. Not trying to get a “Raptor” front end. Just trying to get more wheel travel. I know there are lots out there like BajaKits, DirtKjngs, and Icon that are direct bolt on F150 replacements. Wondering if that will met me the same/better performance then trying to simulate a stock Raptor.
 
Top