New Melling Performance Oil Pump Coming

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dane

FRF Addict
Joined
Sep 20, 2011
Posts
2,201
Reaction score
777
Location
Littleton, CO
My engine guy sourced it for me. I can find out but from a quick google it looked like there were a bunch out there.

And yes that is exactly what it's made/used for.

What are you searching? My Google-Fu is not serving me well today.
 

Truckzor

FRF Addict
Joined
Feb 17, 2013
Posts
2,419
Reaction score
1,383
So I'm seeing a max of 82-83.

Am I understanding that this melling will max at about 95?

Thoughts on that? This is above my paygrade.

Will the "red" spring change that max to 85?

The gauge is probably only accurate within 2-3 psi. I would assume the stock pump has an 85 pound spring in it. I personally would not hesitate to try running it a little higher with the Melling. Assume it could only help float the crank under high load. And I doubt the extra 10 psi is going to blow any seals out.

But the above is all purely speculative.
 
Last edited:

HAP

Full Access Member
Joined
Feb 11, 2014
Posts
795
Reaction score
426
Location
NE NC
Truczor, if you don't mind, can you ask your engine guy to provide you with the P/N for the plate since we know yours fits and works?

R,
HAP
 

Truckzor

FRF Addict
Joined
Feb 17, 2013
Posts
2,419
Reaction score
1,383
Truczor, if you don't mind, can you ask your engine guy to provide you with the P/N for the plate since we know yours fits and works?

R,
HAP

I just sent him a note. He works on and travels with a race team so he can be a little slow to respond sometimes. You might be better off calling SDHQ or one of the other vendors.
 
Top