What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mpbowyer

Member
Joined
May 20, 2016
Posts
28
Reaction score
16
97k miles, first suspension service of any kind.

Replacing upper control arms with stock replacements, boots were destroyed, probably had 1/8" vertical play in joints.
Replacing lower ball joints with Moog, stocks have some play but look pretty good.
Replacing all CV boots with silicone from Forged, 1 was leaking.
Sent off shocks for a rebuild with Viton seals and a flutter stack from Forged, 2 were stuck down and all 4 had leaked fluid.
Retorqued all suspension-related fasteners.
Replaced all pads and rotors with Motorcraft, was down to backing plates on front pads.
Removed 1.5" wheel spacers.
Replaced stock lug nuts with Gorilla capless.

Still have to find alignment shop, should be done by Monday with everything. Can't WAIT!
 

Johngm45

Full Access Member
Joined
May 19, 2017
Posts
293
Reaction score
80
I installed eibach and 20x11 Ag wheels with nitto 35x13.50 20 ec3e8c5c60485eaaafa7eb9ae76dc268.jpg


Sent from my iPhone using Tapatalk
 

mmaterni

Full Access Member
Joined
Dec 31, 2014
Posts
563
Reaction score
649
Location
Toledo Ohio
Gave the old girl a bath after a run this weekend in Tennesee. Then layered some Adams Brilliant glaze and paint sealant on. Would have been awesome to do it right with a paint correction and clay prior but things are getting cold fast here in Ohio. Won't be long now and we'll have that fluffy white stuff and the dreaded salt on the roads.

Sent from my SM-G930T using Tapatalk
 
Top