Rogue UCA

Not a big thing im worried about but i have squeeking from the bushings on my newly installed uca's...should i have used grease or something else during install? and is there a way to eliminate the creaking without having to remove?


thank you in advance.

Adam

Likely will go away, needs time to break in.

Sent from my XT1254 using Tapatalk

Did you call Rogue?

SZDZMTR said:

Did you call Rogue?

Click to expand...

i have not called rogue yet..was thinking bout it though.

Rogue installed mine and they have never made noise. I'm pretty sure they don't have a grease zerk, you might be able to hit them with a spray lube, not sure if it will help.

What UCA's do you have? I have their Heim ones and no issues

Must be Heims UCA. I have the Rogue UCAs with bushing and they don't make any noise, plus you have a grease zerk on the bushings

i have the regular ones with the bushings...not to totally noob it out but the nozzle on the top is the zerk? i can add grease into the bushing?

NECKROLL said:

i have the regular ones with the bushings...not to totally noob it out but the nozzle on the top is the zerk? i can add grease into the bushing?

Click to expand...

Yea, nipple with the hole in it. Rogue told me to use white lithium for my lowers etc, I'd guess its the same for the uppers. I've been told 5 pumps from the gun or pump until it oozes out the side, the latter was what it took to quiet my rear down.

Doc Constantine said:

Yea, nipple with the hole in it. Rogue told me to use white lithium for my lowers etc, I'd guess its the same for the uppers. I've been told 5 pumps from the gun or pump until it oozes out the side, the latter was what it took to quiet my rear down.

Click to expand...

awesome will tackle this weekend and report back. thank yall for the help. i did the installation of the uca, tie rods, 3.0 kings and gusset kit myself so its been a learning process.