Installed RPG Offroad Collar

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nogard

Member
Joined
Dec 9, 2016
Posts
21
Reaction score
21
RPG lift installed. Measuring from the fender lip to the center of the wheel, it's perfect. Same distance front and back. Thanks RPG. You nailed it, and, the quality is second to none.

Any noticeable difference in ride quality? I've got a shop by me that does a lot of truck mods and when I mentioned the perch adjustment the guy behind the counter insisted on a leveling kit (I personally don't care to go that route) because of the complaints about ride quality suffering with a perch mod. Seems perch mods are the way to go from everything I've read on this forum.

Btw, truck looks great! I have a black Scab that I would like to level.
 

Huck

FRF Addict
Joined
Aug 26, 2012
Posts
4,202
Reaction score
1,839
Location
Chicago Sw Burbs
Any noticeable difference in ride quality? I've got a shop by me that does a lot of truck mods and when I mentioned the perch adjustment the guy behind the counter insisted on a leveling kit (I personally don't care to go that route) because of the complaints about ride quality suffering with a perch mod. Seems perch mods are the way to go from everything I've read on this forum.

Btw, truck looks great! I have a black Scab that I would like to level.

On Gen1 there was a pretty substantial difference in ride quality when going to mid perch. ride was much stiffer.
 

sea2jet

Full Access Member
Joined
Dec 31, 2016
Posts
112
Reaction score
102
I think the RPG collar gets it pretty darn level. I don't think I would want to go any higher. It has settled after 250 miles on frost heaved roads and now the rear is 1/4" higher than the front. Looks perfect.
 

Attachments

  • IMG_5560.jpg
    IMG_5560.jpg
    121 KB · Views: 236
Last edited:

MajorAR

FRF Addict
Joined
May 28, 2013
Posts
2,059
Reaction score
2,138
Location
Kansas
Here are a few photos from an installation today with the shocks on the vehicle. [emoji1417]

2ef265bb4ab2fa5ee9e4869081ef525b.jpg

f6de594ee1f8b6287274797621949e23.jpg

a741e01843409662bb928783296912fe.jpg

a8606867d76f32811e1f1057a6862d50.jpg

(1) jack stand
18mm combo
8mm on 1/4" ratchet
3/16 Allen wrench
Rubber mallet
Torque wrench
Floor jack
Aluminum block
external coil spring compressor (can rent this item from most auto part stores)


Sent from my iPhone using Tapatalk
 
Last edited:
Top