DrippinRaptor
FRF Addict
Nice. I'm halfway there in my 2012, just hit 75k. But I've had way more issues than you so far.
150,000 and counting....
- Thread starter dataustin
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I think you are pretty close! lol I know some of the 2011 miles were at $4/gal (most pumps had a $100 max and I remember getting so mad when I had to go in with my card just to finish filling up).
Bulletnjm
FRF Addict
Haha thats awesome
Truck looks great. I'm not far behind you in milage, but I've had way more things go bad on my truck than you. I can't even remember all the repairs. Recently just had a new wheel bearing due to the speed sensor going bad.
I just added an ARE cap, I love that thing. Very secure and looks a lot better than I thought it would.
Do you have any engine mods? You life time MPG are the same as mine. Which is surprising to me since I have LT headers and a lot of offroad miles.
@Yukon Joe
Drive your raptor here!!!!
Great Lakes Raptor Excursions (GLRE) | Run Raptor Run
( * Y * )
Yukon, stock all the way. I did just a little offloading when I first got it, but the large majority of miles have been highway.
As to the A.R.E shell, it is all that and more!
Full disclosure, the blend door actuator has been going out for about a year. I can deal with the 3 knocks each time I start the engine. I plan to run it until it freezes on 'cold' in the winter or 'hot' in the summer. And of course, I have the 'clunk' in the drive shaft. It would be great if FORD is reading this and decides to replace it, otherwise, the next $300 will go to replace it with one that has the teflon on the splines.
All that being said, this is one hell of a truck!!!!!
---------- Post added at 09:12 PM ---------- Previous post was at 09:11 PM ----------
Nope, this one kept the truck from starting.
---------- Post added at 09:18 PM ---------- Previous post was at 09:12 PM ----------
Drippin, knock on wood! I halfway expect to find the engine laying on the driveway that now that I have posted this on the forum. lol
Yukon Joe
FRF Addict
Have you done the fuse 27 relocating kit yet?
@Yukon Joe
Drive your raptor here!!!!
www.runraptorrun.com
( * Y * )
@Yukon Joe
Drive your raptor here!!!!
www.runraptorrun.com
( * Y * )
Have you done the fuse 27 relocating kit yet?
@Yukon Joe
Drive your raptor here!!!!
Great Lakes Raptor Excursions (GLRE) | Run Raptor Run
( * Y * )
No I have not. Is there a thread?
2014RubyRed
FRF Addict
Love reading this thread every now and then. Just rolled over 91k with my 2014 and thinking I'll keep this one for a while. We'll see, as I have been off road a little more than you and hoping that doesn't affect future durability. No rattles or squeaks. Driveshaft has that noise as well.
Yukon Joe
FRF Addict
http://www.fordraptorforum.com/showthread.php?p=805318
@Yukon Joe
Drive your raptor here!!!!
www.runraptorrun.com
( * Y * )
---------- Post added at 07:13 AM ---------- Previous post was at 07:12 AM ----------
Dip the tip of you shaft in some grease. It won't squeak after that. Lol...
@Yukon Joe
Drive your raptor here!!!!
www.runraptorrun.com
( * Y * )
Ford Raptor Fuel Pump Fuse Issue - FORD RAPTOR FORUM - Ford SVT Raptor Forums - Ford Raptor
@Yukon Joe
Drive your raptor here!!!!
Great Lakes Raptor Excursions (GLRE) | Run Raptor Run
( * Y * )
---------- Post added at 07:13 AM ---------- Previous post was at 07:12 AM ----------
Dip the tip of you shaft in some grease. It won't squeak after that. Lol...
@Yukon Joe
Drive your raptor here!!!!
Great Lakes Raptor Excursions (GLRE) | Run Raptor Run
( * Y * )
I usually spit on it.
Similar threads
