Recent content by Uzzirider

I measured voltage at the caliper. There are only two wires, and the system seems to operate with +12V down one wire when engaging the E-caliper, then reversing polarity and sending +12V down the other wire to release the E-caliper. I also noticed that if you unplug the caliper wires from the...

https://www.911motorsports.net/VehicleTrailer-Mounts--for-Badland-3-ton-Off-road-Floor-Jack--Harbor-Freight-Mounting-kit_p_1117.html apparently these guys will have a Badlands specific mount in a few days edit: I've had a HF alum 'racing' jack in the bed of my raptor for 6 years and it's been...

I mounted my Point-1 antenna on the GJ 3rd brake light. Took some fab time but it looks great and its out of the way. Don't have any pics but can get one if you need it.

Aw bummer. I have LED too and hoping to use the high beam trick. Regarding your question - as they described it, you can program one of the buttons to kill any of the others.

Just a thought - was talking to the sPOD guys at SEMA and they said you can wire your OEM highbeams stalk to their device, and set it up to switch off your offroad lights. Seemed like the most intuitive way to do it plus you don't have to take your hands off the wheel, but might take some...

Yeah - I'm wondering if I should get the amber wide cornering lenses to tame the two S2 pros. Alternatively, the spot lenses might be effective against tailgaters

One of the current projects that I could use some help with. I 'm going to run two amber chase lights in a GJ housing. In the center position I'm planning to use an S2 sport for a BRAKE light. I haven't found anyone that's done this. I'm not a fan of the three little LEDs, but I don't know if...

One month update. Got the truck back home and haven't really been driving it - it's been torn apart for a bunch of work. They're not as pretty as raptor seats, but now they feel better. Had foam added to the thigh and back bolsters for a custom fit. The seats really hold you in place...

Any updates with the electric parking brake idea?

Its turned out really well. Heading there to get it later this week. thanks :cool:

Wild eh? I figured they'd just do the typical side exhaust - punch a 3" tube through the bedside, metal trim ring, etc. This square style is totally unconventional but I like that about it.

That's a great data point, thanks. A separate rear caliper system would also provide some redundancy. Good insurance when you're way out in nowhere.

Cool, just ordered the Alcon 6 pot front kit. Thanks for the tip.

Yea they did a great job with it. I needed it to be quick detach since I'll only use it when camping with my GF. Otherwise I'll remove the rack&RTT and keep it in the garage. I built a system using a Harbor Freight hoist to lift and store the setup in my garage. New Rack:

That was the suspicion in the other thread. A lot of electronics in these trucks! Hopefully turning off the TC would allow the feature to work correctly. I don't know how to test this beyond just building the hardware and then seeing what the software thinks...