I didn't see it posted, so here's the link. I followed this and it worked perfectly, sans a bad brand new USB 3.0 stick from Kingston. Once I used a different flash drive it worked flawlessly. My truck had 3.0 and I went directly to 3.4...
Unfortunately, yes, it barely taps it. I thought it was clear (eye balled it) and any amount of pressure on the gate taps the gate on the rack. I ended up having to PDR out a dent and just don’t open it with the rack attached. You could probably use a 6” extension and clear it with no issues.
I have an SCT x4 on my 2018, running the 93 octane tune out of the box, and so far, it’s been great. Definite, noticeable improvement in power and drivability, and was able to disable start/stop. My local tuner can create custom tunes for it, but I haven’t messed with that yet. I’ve got no...
A personal friend owns a local dyno/tuning shop, so we’ll eventually mess around with some custom tunes. I’ll even do a stock flash versus the SCT pre loaded tunes and report back. Even the base 87 tune woke her up.
I just flashed my 2018 with an SCT X4 this evening. I had to perform a firmware update on the unit, but it worked perfectly with no issues. Just preloaded the 87 tune as it’s what was in the tank at the time.
If I’m driving, and park, and shut the truck off, it acts perfectly normal when I get out and shut the door. It’s when I reopen the door, that all the lights flip on, and the center screen gives its animation. If you close the door, the rest of the lights and the IPC shut off, but the...
I think that’s exactly what is happening. I had my slider door tray closed last night, but tonight I noticed the USB surround lights stay lit as long as the screen’s backlight is on. Once I reflashed the DDM/PCM a second time back to stock, it continued to act the same. Is this considered...
I was succesfully able to reset all modules, and found it was the DDM/PCM modules causing the screen not to flip off. I'll start with the Lincoln mirrors and see if it does it again. Will update as I figure it out.
Thanks for the help!!
---------- Post added at 09:30 PM ----------...
Got an odd post Forscan issue.
I did a couple of mods, and all took just fine.
Did:
Global Windows
DRL Light switch to parking/turn
Temp/Trans numbers above gauges
Heated Seats/Cooled Seats/HSW on Sync screen
Lincoln Mirrors
Auto Start Stop Disabled
All took fine and worked as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.