Recent content by thedefboy

  1. T

    GEN 1 So I have these 37's and now having issues??

    So as it turns out i have the 1.25 ball joints in the UCA. So still working on the issue with Stock wheels. Would the shock perch adjustment have an effect on the UCA being slightly tilted due to higher shock position? Currently in the middle or 2nd position .
  2. T

    GEN 1 So I have these 37's and now having issues??

    Nice picture, did they ask you not park there too :) Anyways my knuckle isnt bent and will be looking into a fix 1 way or the other. I have been going to Baja for the last 18 years mostly on a bike from San Felipe to Lapaz or Cabo then back on our yearly 2 week trip to the sun. In...
  3. T

    GEN 1 So I have these 37's and now having issues??

    What is the exact spacing/ off set needed for wheels? The newer wheel spacers are not a blank block with holes in it . They attach with the stock bolts and then the spacer it self has its own bolts. Mechanical attachments would be similar to stock with no more no less stress on individual...
  4. T

    GEN 1 So I have these 37's and now having issues??

    Yes , but wouldn't a wheel spacer do the same thing. And why didn't Camberg not specify the need for additional spacing when it was supposed to be a direct replacement for upper A arm. The stock tires rubbed also, i checked them as well.
  5. T

    GEN 1 So I have these 37's and now having issues??

    I will look at the paperwork from original install if it is the 1.25 or stock set up rather than the 1.5 , what would be the next step?
  6. T

    GEN 1 So I have these 37's and now having issues??

    So how is that done ? swamping out the whole UCA or changing the Ball itself.
  7. T

    GEN 1 So I have these 37's and now having issues??

    Thanks Pacific Wheel , the ones you suggested are the ones on the truck now, i believe..
  8. T

    GEN 1 So I have these 37's and now having issues??

    I am not apposed to removing the inner wheel cover and re working the metal behind it , just not sure of what is needed , some pictures of what was done on others trucks would be helpful rather than just guessing . Thanks for the input in advance.
  9. T

    GEN 1 So I have these 37's and now having issues??

    This is the set up in the back of my Raptor
  10. T

    GEN 1 So I have these 37's and now having issues??

    So when i got back from Baja i had to replace the upper control arm and the factory one isn't serviceable. I had Camburg Upper control arm installed mid perch , stock wheels with 37 x 12.5 x 17 Cooper Discovery Maxx tires. now i have had issues with the hose for the air locker/shiftier system to...
  11. T

    GEN 1 So I have these 37's and now having issues??

    I took my Raptor to BAJA in stock form and had a great time with no issues down and back. But now with 37s
  12. T

    Where are you Raptor Owners

    Done and Done ( spending quality time at 13 Coins )
  13. T

    So you bought a Raptor

    True that a 500 dollar part cost Ford 15k in labor at least and 4 motors complete at 5k a pop, so in total 35k +or- Seems very stupid to me
Top