Recent content by Ryan C

Certain UCAs allow adjustment of alignment on-the-truck, with the LCAs locked out. For those who hit things hard, this can be a performance (aka reliability) improvement. Icon had these for Gen 2, and SVC has for Gen 2 and 3. However, SVC requires drilling a larger hole for the non-tapered...

posting this again for people to learn from

For what its worth, I initially ran my factory 3.0s on my gen 2 at 1.5” of lift and disliked how quickly and violently they hit full top out in the downtravel. Adding preload puts more pressure on the shock when it hits full top out so its going to be more violent. And taking away down travel...

Silver trim is completely removed from behind light. The two piece grill was also cut to fit the light.

Here is the camera view

I don't really use the front camera much, but there was very little impact as the light is set back

Drive mode adjusts throttle response, shifting, braking and other vehicle dynamics. For me offroad, Baja mode is super important because of how it turns down ABS. Normal ABS settings (e.g. when in sport) are downright scary in the dirt. This is particularly the case in washboard bumps. I'll...

nice work @razor2430

So ... anyone with any input on these Gen 3 settings?

Hi all, I have done some testing of my gen 3 in offroad conditions, in Baja mode. Conditions included lots of direction changes, lots of bumps and elevation changes, and plenty of embedded rocks in the surface and on top of it. I locked the diff, and put traction in the level 1 disable...

Learning I still am ;o)

For the Onx6+ I posted elsewhere about this, describing how I mounted and what I cut. https://www.fordraptorforum.com/threads/onx6-30-arc-on-front-bumper.95665/ moving to the wiring, I ran 12ga wire from connection on the light, up to the cab side of the battery tray, where I connected to a...

Thought I would share some ideas for how to wire XL80s on A pillar mounts and an 30" onx6+ bar on the bumper. I had the xl80s on my last truck, but hadn't wired a relay before. I'm obviously not a pro, so please let me know if I should adjust anything or you have other tips for me or others...

Pro Eagle https://www.proeagle.com