Had a few hundred pounds in the bed once, and never pulled a trailer. I have a Dodge diesel for all the heavy work, so the Raptor has never done work. Yeah, it was on even ground. The bed doesn’t look tweaked, but that’s a good point... I didn’t think about that.
Wondering if I can trouble a few of you to take a measurement for me.
My truck’s rear suspension is uneven, off by about 1 inch from ground to top of wheel arch. Both tires are at same pressure, and the bed is unloaded (I do have a bedcover, but I noticed this before the cover was installed)...
This may help you understand the natural sonic characteristics of the 3.5L V6 vs the Ford V8. You may have noticed that under 3k on the Raptor, most of the exhaust systems sound pretty similar (ignoring loudness) but above that, some will try to alter the sound of this engine with varying...
60 degree V6 motors have to fire at each 120 degree rotation of the crank in order to keep the engine balanced, and this causes the exhaust to sound very different than what a V8 sounds, so if that is your reference, you will not be happy with any exhaust system, none of them will give you the...
Okay thanks, this would require probably a bit of trimming to work on an aftermarket bumper. I have an ADD bumper and already had to trim a bunch of the plastic around the stock cooler. Might have to go with the Full Race unit instead.
After about 2000 miles on the MPT tune, I can tell you the stock intercooler gets heat soaked pretty easily even when you aren’t pushing it. On a good day, I am seeing about a 30-40F gap between Ambient temp and AIT2. If you push it just a little, 50F gaps become common. This is going to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.