Recent content by nbg-mustang

  1. N

    Softer rear leafs and leveling ICON/STOCK/DEAVER

    Hello Gen1 guys, At the moment I have installed 3.0 Fox shocks on the rear and Deaver +3, and Fox 3.0 on the front. Now the Deaver +3 are to stiff and I wanna go back to stock leafs or ICON leafs. But when go back to stock, the truck need to be leveled in the rear. What can I do? Install a...
  2. N

    GEN 1 Sway Bar vs. Traction Bar

    Ok so I have to explain it better and I used the wrong word. The problem I have is axle wrap. My setup is Fox 3.0 front and rear and rear Deaver +3 Deaver +3 is to hard, I will go back to stock leafs. Or maybe Icon Leafs, from what I heard, they are softer. So what you guys wrote is, that Sway...
  3. N

    GEN 1 Sway Bar vs. Traction Bar

    Hi Gen1, can you tell me what is the difference between these two parts? I sometimes have problem when towing a trailer that it feel like the rear axle is moving. So now I don‘t know which of these parts are helping to stop that. Thank you
  4. N

    GEN 1 Frame CAD Raptor Data

    Hi all, can you maybe tell me where to get exterior CAD Data from Raptor like the one I add here as picture? I will design my own bumper, so it helps a lot to have a Data from Raptor front and rear with no bumper. On www I only can find one which does not include the frame and the front/rear...
  5. N

    GEN 1 Rogue Racing Enforcer front Bumper Gen1

    Does any of you have installed this bumper? What weight does it have? Don‘t get an answer from RR Daniel
  6. N

    37" Tires on Raptor.

    Okay I try to find Information but didn`t find anythink. Does real 37 s fit with Fox 3.0 on the front? If I jump or offroad hard, is pinch weld needed? Or does it fit with no needed pinch weld? Do I need any updates on the rear? Fox 3.0 and stock leaf springs? Thank you Daniel
  7. N

    Axle hop explaination and a cheap cure

    Canuck714 Ok, can you tell me where to order the leaf spring? I stay in Germany and I can‘t find a shop which do this shop. Thank you
  8. N

    Axle hop explaination and a cheap cure

    Is that also able with the Ford Kit # 0910F150XLKIT3A+S which adds a extra leaf? Does any of you know if that makes the same smooth ride quality like Jeff‘s setup did?
  9. N

    RPG Leaf Springs

    What progressive springs do you use?
  10. N

    GEN 1 SVC Bump Stop ABS

    Hi all, can not find a Info about it, but is the SVC Bump Stop for Gen1 Raptor welded to the frame or do I need to drill a hole into the frame to install this BumpStop? thanks Daniel
  11. N

    GEN 1 Rear Brembo vs. rear R1Concept

    Hi Gen1 owner. At the moment I need some new rotor and pads on the rear. Now I was thinking to upgrade to rear Brembo 2 piece rotor or R1Concept 2 piece rotor, but with the stock caliper. Only found some infos about one piece rotor. Is that possible? Thanks Daniel Sent from my iPad using...
  12. N

    A little mod I been working on...

    Are those Rock Slider welded to the frame or screwed? Im interested too. Daniel
  13. N

    Upgrading stock OEM trans cooler

    where to get this sway bar? I only know the one from SDHQ Looks pretty good to me. Sent from my iPad using Tapatalk
  14. N

    Upgrading stock OEM trans cooler

    What is that black pipe/pole under the axle?
Top