Recent content by Mylo2021

  1. Mylo2021

    4H always engage after truck starts

    Thanks for your advice. I lifted the truck and tried to turn the front driveshafts by hand and they were locked. When my truck got flooded they dissembled the Transfer case and the transmission. I don´t know if is possible that the mechanics had ensembled in the 4x4 position. @FordTechOne I...
  2. Mylo2021

    4H always engage after truck starts

    @Old-Raptor-guy I can tell that the 4x4 is engaged because is hard to turn and the tires squeal. Also when I start driving with the Forscan I noticed after 400 Seconds aprox the SIGNAL "YES" changes to "NO" and after that I turn the knob to 4H it will engages and the signal changes to "YES" and...
  3. Mylo2021

    I am not able to attach a picture here but you can see my Forscan Screenshot here...

    I am not able to attach a picture here but you can see my Forscan Screenshot here: https://www.fordraptorforum.com/threads/4h-always-engage-after-truck-starts.93743/#post-1825194
  4. Mylo2021

    4H always engage after truck starts

    @Old-Raptor-guy because I can monitor it on Forscan
  5. Mylo2021

    Bump

    Bump
  6. Mylo2021

    Thanks for your response. The 4x4 selector stays on 2H, but the truck engages 4H by itself for...

    Thanks for your response. The 4x4 selector stays on 2H, but the truck engages 4H by itself for approximately 7 minutes every time that I start the truck. Even when the engine has warmed up. I have tested for vacuum leaks and it seems that everything is alright. It holds vacuum. I have used...
  7. Mylo2021

    4H always engage after truck starts

    Thanks for the help. Here is my Forscan indicating that the signal is NO but the IWS won't follow the command Regards
  8. Mylo2021

    *ON HOLD* RPG Traction Bars, Gen 2

    Hi Fennec, Does it come with all the installation hardware or just the traction bars? Regards
  9. Mylo2021

    My truck got flooded about 1 year ago I replaced every module and everything works fine. I am...

    My truck got flooded about 1 year ago I replaced every module and everything works fine. I am just having issues with the 4x4 which I had to disconnect manually in order to keep the truck 4X2. Right now I have the following DTC´s B1081 and B11F0. I could not find any information about it. I hope...
  10. Mylo2021

    Hello @FordTechOne I am having issues with my 4X4 always that I start up my truck 4H engages by...

    Hello @FordTechOne I am having issues with my 4X4 always that I start up my truck 4H engages by itself but the 2H light remains, after 7 minutes it disengages and it starts working normally. I used FORSCAN and my ECU sends the signal "NO" to the IWS which remains in "YES" but it won´t follow...
  11. Mylo2021

    4H always engage after truck starts

    Hello Fellas. I am having issues with my 4X4 always that I start up my truck 4H engages by itself but the 2H light remains, after 7 minutes it disengages and it starts working normally. I used FORSCAN and my ECU sends the signal "NO" to the IWS which remains in "YES" but it won´t follow the...
  12. Mylo2021

    The tales of Raptorstain

    They just called my fuel pump is gone they want to charge me $450 for it
  13. Mylo2021

    The tales of Raptorstain

    Hello Guys a new update and will answer a few questions To be honest I never though that this would happen to me in first place I bought the truck as my Weekend truck if anything had failed before It would be covered by the warranty. So maintenance was never a issue since I was not going to...
Top