I worked with Deaver as well and we went with stock height which I believe is +2 HD springs for me. My wake boat is about 7k lbs. the ride without towing is still much better than the factory springs. I also installed the Camburg bump stop kit. Not sure I actually needed this or not as...
Definitely get a WD hitch. But if you plan on towing a lot and keeping your truck you should also upgrade your springs to Dever HD’s. These give you a 500lb preload and makes a big difference with higher tongue weights. I tow a 23 ft wake boat and its made a massive difference. I also got...
My hitch wasn't level either. I took it in and had them replace it. I would highly recommend you get it replaced and always use a weight distribution hitch. The Raptor is a horrible tow vehicle. Be safe
I use the e2 as well to tow a Nautique G23. Boats head y at about 7k lbs with close to 600lb tongue weight. I have 2" Deavers and the Camburg bump stops. Seems to work great. I did have to have Ford replace my hitch as the original had a slight negative angle. Otherwise, everything is good.
I have the Icon collar set at 1.5 inches up front and the Deaver HD at Standard Height (+2's) The HD's are a little stiffer, but we tow a heavy wake board boat and wanted the extra stiffness for that. I do get a little rubbing in the front with the 37's, even after some trimming, but its...
I had my truck coated with Ceramic Pro about a year ago. It cost about $2k, but the truck literally still looks new. Might be worth the extra investment.
I have auto stop eliminator as well, but absolutely hate the light. Can you pop off the cover for the switch without pulling the dash apart? I'd like to add the tape on the light. Appreciate the help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.