Recent content by Maintecheib

My $0.02, Just installed my spare rebuilt, w/flutter stack, shocks, by Forged Off Road, inside Eibach springs, low perch. Had them at mid perch for a week, made the truck jittery, switched to low very smooth and gave me the 2 inches of lift I wanted. Also installed a set of Deaver +2 Leaf...

Great write up! Thank you for listing all of the parts!

Mounted my compressor to the bottom side of the radiator mount, tank on the outside of the right frame rail. Mounted the air chuck behind rear licenses plate.

Following, pictures of the prototype set-up

Thanks @Louisiana Barefoot, the connection to the MAS was one of the number of plugs I checked. As @FordTechOne is noting that there seemed to be a network issue. There are a couple of individual sensor errors, most seemed to have been some type of hiccup in communication. Neither of my code...

I had been looking for this type of solution, thanks.

Thanks for the input! The remote start is the factory system. I have 2 scan tools, both are OBD Link's. One is blue tooth, the one I pulled the codes with on my phone. The other one is USB to my computer. I will check to see if I can run a network check. It's interesting that you mention the...

The other day my 2011 scab decided to give me a surprise. Remote started the truck, after about 10 minutes I got in and put the key in the ignition and turned on. All seemed fine. Put in Drive, toggled gears down to 2, in parking lot don't need it in 3rd. All seemed fine no warning lights...

I should be able to get 55-60k out of them.

After 45k the Coopers are still just as quite as when I first put them on. I'm running them at 35 psi, with even wear at 15/64" tread left to wear bar.

Another one for the Cooper AT3 xlt's. I'm running the 37", 6 tire rotation with 45K on them. I'm in Wisconsin and my truck is my dd, don't matter the weather the Coopers handle it all. When I first got my truck it had the Toyo M/T's, would get stuck in the car wash, had to put in 4x to get out...

Thanks also @Oldfart. And if your not a fan of the Amazon, https://workglovesdepot.com/1628-waterproof-double-thermal-shell-double-latex-coated-winter-gloves-sandy-finished/

Gen 1, 6 tire rotation, have all tires marked. Back cross to front, front left to spare, front right to storage. Previous spare to left rear, previous storage to right rear. Every 7500 @ oil change.

Not really noticeable the light beam is fairly focused. The hood is brighter but really no glare.

I just put the VisionX 4.5" 40w on my A pillars, love them. Great distance. Put the clear spot lens on, after painting the edge. Excellent set up great lights. Also have blue lens for snow.