Here's what the switch looked like when I got the lights.
It's the correct switch but the side is broken and only go's from on-off now. So new switch is required but I want to hook the switch up to see if the lights work @DMays
No I wired them to the switch the BD harness comes with but the switch is broken and was seperate from the harness when I recieved them. This is not the harness used for upfitters/spod etc.
I tried a couple ways on the switch but nothing turned on.
Wondering if anyone else has used this...
So I purchased a pair of used amber LP9 pro driving beam pattern. The lights came with the switch harness (harness 640172)
After running the harness how I wanted, I plugged the lights in and went to plug the switch in to find it was broken. But I was also unsure of what wires go to what prong...
I have a pair of rear king shocks for my '19 raptor that I got used and would like to rebuild them.
I had a local shop source out a rebuild list but some parts did not seem right so here I am reaching out to the community to see if someone on here knows the rebuild parts list (part numbers as...
Hey Ryan, I will keep my eyes peeled for it around my area.
It definitely sticks out and hopefully it gets found
I'd be finding all receipts for your parts and hopefully ICBC does not try to pull a shirt over your head.
I like the idea of this kit and probably get it in the near future.
I have icon leafs on my gen 2 set in option 2 and know they should work with this kit but wonder if there is something I may be missing.
Of course deaver +4 would be ideal but don't want to have to purchase new leafs for this kit
So the other day my 14 month old bully dog chewed part of the upper seat cover and was wondering if anyone knows of a good source for a replacement.
I contacted my local ford dealer to find out they can get then but for a hefty 3k price (I live in canada) for just the upper part.
I am going to...
Correct, loosened the 2 leaf c clamps and removed the bolt. Slid 1-2 average thickness washes between the clamps to help keep a slight gap. Tightened back up and has seemed to get rid of the clunking.
Well I've basically resolved mine clunking. I added washers between the leaf clamps and noticed a change right away. One to two small washer on between each side of the clamps and ta da. Hope this works for you guys.
I noticed it better. Starting with having the 2" block removed you don't get the axle wrap. The progressive springs help to smooth out harder hit st speed. It's slightly firmer than stock over slow speed stuff in town but I like it better.
I'm mostly empty when not offroading and like it. You...
From what I can see also is the retainer clamps are what are causing the clanking/clunking perhaps. Icon said the pry them outwards because they aren't replaceable. But it's a bit of a pain. Going to use a small bottle torch to heat them up and try to pry apart. Wish me luck.
@Qcfx2
@under_psi...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.