Recent content by M3toSVT

  1. M3toSVT

    CORONA RAPTOR RAFFLE

    Let me know how I can maybe donate something for the raffle. I haven't been active on these forums in some time but quite active on the FB Pages under Kevin H. or Eastern Shore Retros. Would be glad to help!
  2. M3toSVT

    Whats needed to take my 2012 headlight to OEM 2014 HID's?

    https://easternshoreretros.com/collections/headlights
  3. M3toSVT

    My headlights retrofit build (round 2)

    Moved this thread over to my website due to Photobuckets bandwidth restrictions. You can now find it HERE.
  4. M3toSVT

    DIY - Stock Raptor 2.5 Shock Rebuild.

    Anybody done the rubber eyelet bushings on the rear shocks? Having a time getting new ones in without damage.
  5. M3toSVT

    HID Retrofit Headlights

    The harness should be an H13 motocontrol. You can swap boxes so long as the wiring is known to be fine.
  6. M3toSVT

    Revalving oem shocks for Geiser springs

    Anything ever come of this. Wondering the same thing.
  7. M3toSVT

    HID Retrofit Headlights

    Check the wiring of the harness to the ballast. Check for a good ground. Sounds like it's not getting solid power and messing up the ballast. Which ballast are you running?
  8. M3toSVT

    Hyper Flash Problem....Really Weird!!

    Too much current on the BCM. If you have the amber portion of the switchback hooked to the OEM turn signal circuit, you will induce additional current on the circuit when voltage is not on the white circuit of the switchback. Depends how you have the lights wired. I took off all the amber...
  9. M3toSVT

    Working on some paddle shifters.

    O, I agree the wheel looks great. Just want the easiest and cheapest option so many others can do the same.
  10. M3toSVT

    Working on some paddle shifters.

    I was always wondering if the the new raptor wheel clock spring would work. Even then, that cost a bit as well.
  11. M3toSVT

    Working on some paddle shifters.

    The wiring is simple. It's just getting through the clock spring so these can be mounted to the wheel.
  12. M3toSVT

    Working on some paddle shifters.

    I need to get back on this. I did see that gen 2 wheel being installed but man they are expensive. I just need to dive into the wiring on the gen 1 wheel and see what I can do with the stock clock spring.
  13. M3toSVT

    GEN 1 Wiring C-Clamp Switchback LEDs

    For anyone interested in separating the wiring from the BCM. You can use THIS wire harness with some minor modifications.
Top