Recent content by Lanthas

I am using these same part number plugs on my Gen 3. Bought them from Goosetuned when we did the tuning last year.

Does it go away after some times or if you change exhaust modes? Mine has a very similar reoccurring sound and it is from the exhaust valves and goes away after a few mins. It can be fixed with the TSB 22-2388 if so. The big thing here when I had mine done was the PCM (or BCM) update that came...

I must have be the one with the opposite feelings of the Geiser springs all around. During my recalibration, I ended up losing the shock modes and steering modes because apparently the ride height of the truck thought it was not level, and had to purchase FDRS access to initialize everything...

I'll throw this out there in case it might help anyone. I had Geiser Springs installed all around on my 37PP truck, and had the same issues of a rougher ride and whatnot. After lots of researching and trial and error, I realized the front 2 sensors were both sitting at ~150mm and the rears were...

I think the only thing you get on an F250 Tremor versus a non-Tremor package is the additional drive modes as well. Maybe these modes can be added via ForScan or something? I also don't know if this changed with the 2023+ F250s as this was back in early 2022 when I was cross shopping these. If...

I had a 2019 Gen 2 before jumping to a 2022 Gen 3 with the 37PP. I also test drove a 2022 F250 Platinum Tremor before deciding on my Gen 3. The Tremor was nice enough on the inside, especially with massaging seats and the ride height, and diesel power. Diesel trucks are pretty sweet too, but I...

I know this is not perfect for advice, but I noticed when I had the TSB done the dealership updated the BCM as well as replaced the springs on the actuators, and the rattle went away and it seemed the truck would start up with the valves open (truck was louder on startup). I think the biggest...

I tried to put a set of the AMS tubes on my Gen 3 and they didn't seem to fit perfectly. The Driver side was ok, except on the Gen 2 (19+ iirc) had an extra sensor on that length of pipe, so you'd need to plug that on a Gen 3. Also the passenger side was too short as well, but I ended up...

Yeah, I recommend it for sure. Worked with Goose for a couple weeks to dial in the 91 ACN and full E85 for the truck after the ID1050 injectors. Definitely a professional and a super skilled and knowledgeable man with this platform and tuning. Just waiting on some extra performance mods to come...

Yeah my truck was an early '22 model when the applique was constrained still. Definitely recommend those clamps that expand enough to go around the tailgate when its down and adhesion promoter. Could probably also get away with using some wood or something to run the distance of the tailgate to...

Did anyone else catch the crazy rattling in the video when they did their startups? I would hope that is solved before the final version is released. Also wonder price versus the Magnaflow one, especially since the stock exhaust doesn't sound horrible to me.

I was planning on an upgrade to the Garrett PowerMax turbos until I was told that they did not fit gen 3 yet, though I think someone on here stated that Full Race is expecting Gen3 compatibles ones from Garrett later this year. Waiting on that or hopefully an MSRP Raptor R lol. I bought the...

So I installed the CVFab V2 and the Hot and Cold Side piping today. Let me say that the finish on everything was great, but man was fitment crazy tight. I followed this a guide and also used the guy with a 2021 Powerboost video on Youtube for reference. Now my biggest complaint is the hot/cold...

I installed these last weekend myself. It was pretty straightforward, but some things that helped me were: 1) leaving the liners in the sun for a few hours before installing so they were a bit more flexible. 2) It’s not required, but I took the rear wheels off to give myself a lot more room and...

I'm not an audio engineer, nor a major audiophile. I did buy the SoundsGoodStereo "Stealth Plus" Kit (The $2200 one) and finished installing it rather recently. The way these trucks come as stock for $80-90k is ridiculously awful. Speaker Count is not something they should have focused on and...