Recent content by jdowens1

The guy stated 5 wits it ltrs is probably just dropping the pan. That is about all you will get out of system when you drop the pan. That's y you have different answers.

K&P engineering is there name but I don't see what there micron rating is.

I would start by starting the vehicle with the key. Then shut off the truck and see if it works. One honk usually means it been started remotely more then twice. The actual remote start antenna is located behind the glove box. It has one single wire coming out of it and it goes to the TPMS module.

If the remote start wAs used twice in a row it won't start a third time until the key is cycled. Start vehicle with key shut off then try your remote start. If the hood switch wasn't working properly it would honk 2times and not start.

Ok the one I read said you clean the filtering element with solvent so I was looking at something different. Sent from my iPad 4 using Tapatalk

What type of remote start do you have? Is it built into the key or a separate key fob? They are two different systems. Also when you try and remote start it how many times does the horn beep when it won't start? If you have a separate key fob based off of how many honks will tell you why it...

Not something I would risk with my vehicle. I wouldn't let K&N pay me to use one of there filters of any kind either. I understand the part of using a filter magnet to help filter out debris but you can get those for any oil filter. The way you clean them sounds time consuming. At 8microns...

V bar chains are expensive but I wouldn't go any other way in deep snow and ice.

I could be wrong since I haven't read a manual in while but It use to be 55 mph was max speed directed by ford to go into 4x4 safely without causing damage to components. Ill have to look to see if still is true.

So the issue now is only with heated seats turning on and you don't want them too? If that is so did you go into your remote start settings and turn them off

So in other words they reset keep alive memory and PCM program. It sounds like your fuel trim tables were all screwed up while in open loop. I guess what I'm still curious about is what caused the open loop fuel trims to change, I think I asked earlier but it was oil less filter on CAI. It's...

Go for it you'll be alright.

For years the oil is full on a Ford when the oil is halfway on the dipstick cross hatch. If you fill it to the top you are technically 1/2 quart overfull. It's been that way since the 4.6 & 5.4 came out in late 90's

That is pretty cool to see the visual. Do you have fox 3.0 in the front as well? I'm guessing since you never bottomed out.

What year and build date is it?