Recent content by JDog

I ended up resetting the code with a code reader and before I had a chance to replace the sensor the OBD tests completed and the code wasn't re-thrown. I'll assume something to do with my Pedal Monster triggered it. I think it was user error in that I had kicked the cable and knocked it free. It...

I know better than to do this, but I just bought the tube that includes the sensor and hope that this resolves the problem. I'm not sure what other direction to go and saw some You Tube video that said the majority of the time this code trips it's indicative of the PCV tube actually being...

Nope. All stock minus the pedal monster that is no longer installed.

I have a 2017 that threw this code. I cleared it and the CEL turned off, but I still see the code in permanent and pending. I read that permanent will disappear automatically if the internal emmission monitors past. But I guess since it's also in pending I have some issue. I checked the lines...

My record on the road humps is just under 60. You couldn’t hardly feel the bump. It was smoother at 60 than 20 Sent from my iPhone using Tapatalk

Sweet! Glad you got it done and glad it took you more than two hours too!!! The KC's aren't super bright. But I used them in Houston in some bad weather and they were actually kinda helpful. Glad the stow and show worked for you too. I'll have to think more about that. I'll roll the dice for...

Yeah. They're nasty little clips for sure. Maybe I did cut off al four. I must have and just didn't remember. Either way, pretty easy install and super bright. I used it at the lease this weekend and was glad to have the light. Sent from my iPhone using Tapatalk

Sorry. Just saw this. Yup, aux 3 for me. I just had to cut off two tabs from grill if I recall. Nothing else had to be removed. It was a pretty easy install. Might want to leave the grill off until you are 100% sure it's aimed properly. Sent from my iPhone using Tapatalk ---------- Post...

Hmmm. I need to take the front grill off to adjust it again so I'll look more closely but I don't think it can be moved at all. Sent from my iPhone using Tapatalk ---------- Post added at 08:48 AM ---------- Previous post was at 08:47 AM ---------- Yeah, that's what Nick at Appolo...

Bracket Someone posted this on another thread. An interesting idea. http://www.cjponyparts.com/license-plate-bracket-sto-n-sho-f-150-raptor-2017/p/LPB51/

For now I'm going to roll with no front plate and see how it goes. It's required in Texas but I've had a friend roll with no plate and he's received one warning in a couple of years so I'll test the waters. How'd you mount yours to the side? Just use the same bracket and rivet it to the bumper...

I guess it's plug and play to be tied Into the lights when you put it into reverse. But could you also run a wire up to the front and tie into an upfitter switch for on demand lights? Anyone know what the amp draw is? Sent from my iPhone using Tapatalk

I installed the ONX6 today and will test it out in the dark. But how would I use the green wire that could dim it? I can't hook that to a second up fitter for a "low beam" bar can I? Not sure I'd want to waste a switch for that but curious about my options Sent from my iPhone using Tapatalk