Is there an interference between the valves and the pistons on our engines? Is a broken valve spring usually catastrophic? Can you recommend a source or brand for high quality valve springs, and lash adjusters for that matter? I'd like to put in better ones than Ford did.....
Hey FTO, if I'm in there replacing the lash adjusters, should I also do anything else, preventatively, like change the valve springs? I'm at 133k miles and I'd like to keep this truck forever, so using high quality replacement parts is key, so if you can recommend specific lash parts I'd...
Lol, not available on the Left coast ;)! It's not pinging, my ear is well tuned to that sound. I'm just talkin' about the first few seconds after startup, I'm remote starting, walking up to it and I can hear it quiet down in 2-3 seconds as oil pressure builds.
FYI, there are differences in synthetic oils, and quite significant ones related to wear! Project Farm just did a great 'no sponsor' shootout, it's about the least biased test you'll find. If you're keeping your Raptor you don't want to miss this! If the link is removed, lookup 'Amsoil or...
I've got the 5 star 91 performance tune in my 2014 and the cold 2-3 shift is softer now. I'm used to it so until the temp gauge comes up I drive easy off the line. Overall completely love that tune. Within a block or two the shift is fine. Lol that tells me the issue is in the programming, cuz...
I'll give that a try. Ya think I can carefully lift that big driver's switch out of it's hole with plastic interior tools or do I need to tear down the whole interior door panel? Lol, no big deal if it's the latter, last sunday I spent the day dropping my Rap's headliner and installing the...
Could the bad driver's switch keep the whole door lock system from working? Are they wired in series? I checked fuses and the wires for breakage in the door jam, but nada. Could be the solenoid, if there is one?
Those Methods are definitely clear coated aluminum, and that's a clear coat issue. Raw alum does not get crazing like that, it just gets dull and you can easily polish the dull out. ...and that's the ONLY benefit of raw alum, I agree with what Old Raptor Guy said, "One of the worst things I ever...
Does anyone have experience using an Accusump on our 6.2L engines? Mine makes a little clatter on startup and it goes away quick. Would the preluber just hide the symptom and not fix the problem; excessive valvetrain lash as FordTechOne said?
Hahaha!!
Lol you guys are killin' me! Pic is a riot :D!
I'm not sellin' my oem 17" SVC beadlocks, aamof, just for you guys, on my next set of new tires, I'll go back to my 17's and see what I like best. Since my Duramax got totalled last month I've got a set of beautiful 95% new 35/12.50R20...
I'm going totally off heresay, Raptor friends and forums Augster, and I thank you for this info! That -13 was my erroneous calculation using the online calculator. I like your real-world experience way better! Same for the SVC uca info. I heard RPG also had a 1.5" uniball option from a friend...
Lets talk about offset for a sec: lets presume we're using a 9 inch wide wheel, 35" tire. What are the main reasons Raptor guys seem to like their wheels tucked in so tight? Clearance for 37" tires so they don't hit the fenders? Less stress on bearings and ball joints? Steering?
I heard to run...
Thank you Christian! Went on their site and the 17x8.5 wheel is a feather light 26 lbs! Oddly, I didn't see a 20"? 18" was the largest listed. Yea I think stock beadlocks are about 35-36 with the trim rings and hardware.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.