Recent content by elMechanic

Sorry for the late reply, I got the MSD coils and wires from SDHQ 546$ , and the OEM spark plugs from the dealership for 85-100$ Dont remember exactly (weird sound cleared and no more coming) With regards to the throttle body and injectors (for the engine stalling and shutting off problem-which...

Sorry for the delayed update so the sound has been gone since spark plugs, wires, coil were changed but engine stalling and shutting off returned.. probably gonna need to change the throttle body and/or injectors

Engine stalling and shutting off problem was fixed by the following So, as I mentioned I replaced the OEM air filter with a new OEM one, and cleaned the injectors with the throttle body, the problem still occurs, Checked engine compression, all pistons are working properly , after re-programming...

Thanks all for the inputs, while trying to solve this dilemma of this weird sound, and the other problem with the engine stalling and shutting off I checked the air filter today, and oh man it probably needed to be changed few thousands back lol, it has a life of -200%, so I ordered a new OEM...

Checked the oil life and level, everything is good, no oil leaks, no nothing.. I think my truck is haunted

So, I have this weird noise that I can heard from inside the truck, but cannot find it when I am outside. Its like a ticking sound whenever I accelerate it increases in frequency and loudness, once I take off my foot from the gas pedal the sound reduces and disappears, I cannot hear it anymore...

Pretty good I haven’t had a good time with the raptor since I installed it. Got some problems with it (not due to the headers) to deal with first. i chose it because of recommendations from my friends will give you a better feedback once I spend more time driving it

sorry to bring this thread back again, I just had the problem twice today. Driving on leveled road, came to a stop sign, and RPM went down to 0 the truck turned off and LOW OIL PRESSURE sign came out haha Already had the fuse fix like back in 2014!

Thank tou all for all of the replies. yes I was concerned about the HP might change during the dyno tune. good to know it will not. will look into it , seems like the answer is denting it.

Hello everyone, So, I recently purchased and installed the ARH long tubes on my 2013SCREW and noticed that the passenger side Headers is touching the frame, which is weird to be honest. Did anyone of you face such an issue? And if so, how was it fixed? I installed the headers at a workshop...

as the workshop mechanic said, The driver side headers was easy. The passenger side was very difficult and took most of the time to install. it needs to take of the engine mount, rise the engine a bit, and install the headers on that side, then get everything back together, and install the...

Installed ARH Headers on my Raptor, coupled with the already installed since 2015 CORSA XTREME .. oh man this sounds loud like really loud, might install a resonator, or change the muffler to reduce the sound a little bit

Niice I got them laying down in my garage waiting to be installed When that Bulletin came out? because I did contact Lee, on 6th of May and they recommended using "AC Delco non synthetic power steering fluid #10-5073"

Niice GL, and please tell us how did you deal with all the messy hoses of the vacuum system of the CVs! I zip-tied them for a while, then just removed them, and now left with a air-sucking sound by the driver side under the hood ‍♂️ Just at the wind shield , I am thinking of closing it with a...

Well, From my very little experience with them till now. I do feel better braking capabilities. And I assume they should last longer than OEM, and no more squeaky noises thats for sure haha