Recent content by Dane

  1. Dane

    Fuel gauge inaccurate

    Soooooo.. you can actually just open up the gauge and move the needle. I've had to do this with both my tach and my fuel gauge. Beware of ever doing a gauge sweep though... mine will "decalibrate". I don't know what's actually wrong, but it has been fine for years, so I'm not motivated to...
  2. Dane

    GEN 1 3rd brake light repair

    So there should be one more for running lights. Process of elimination works here though! I'm a super big fan of the black wire being a hot wire... Go go engineers!
  3. Dane

    GEN 1 3rd brake light repair

    ^ This. It isn't bad, there are only a few wires. At the time Recon had totally incorrect instructions - which is worse than no instructions. Maybe they have corrected that by now, but I don't trust them. Multi-meter only takes a couple minutes. Test light would work too.
  4. Dane

    GEN 1 Front Camera not working - won't enable

    I did, see my post right above yours.
  5. Dane

    Any way to reset factory door pin?

    Is your code not printed on the BCM as shown in post #6 above?
  6. Dane

    Any way to reset factory door pin?

    That's the BCM, and it does house the code. I had to get a new BCM, and it came with a new card/code.
  7. Dane

    Switch on OBD Port

    That's what I have. You can't switch tunes on the fly. You have to re-flash. The switch doesn't change tunes.
  8. Dane

    Switch on OBD Port

    5-Star usually uses an SCT tuner I think. Is that what you have? https://5startuning.com/product-category/2010-2014-f150raptor-6-2l/2010-2014-f150raptor-6-2l-tuners-programmers/
  9. Dane

    Switch on OBD Port

    As far as I know, the Raptor doesn't support on the fly tune switching like some diesels. I'm not thinking tune. What kind of tuner was in the glove box? Maybe the switch is for something that has been removed? Gotta start tracing.
  10. Dane

    GEN 1 Front Camera not working - won't enable

    For those interested, I have resolved my problem. It turns out (there is another post about this too) that when you replace your rear camera you also have to do magical computer calibration crap for it to entirely work correctly. It WILL turn on without this, however the zoom won't work...
  11. Dane

    Gen 1 Front Camera Stopped Working After Rear Camera Replacement

    Spoke too soon. Can't find the old camera. Maybe I chucked it. Damnit. I also noticed that while my rear camera works fine, the zoom feature does not. I can hit zoom, it takes me to the zoom options, but if I click any of them nothing happens. Does this also sound like a symptom of the...
  12. Dane

    Gen 1 Front Camera Stopped Working After Rear Camera Replacement

    So, I still have my old camera that had issues. In theory it should still "work" since I haven't done the above? Would it be a good troubleshooting step to throw the crappy one back in and see if the front works?
  13. Dane

    Gen 1 Front Camera Stopped Working After Rear Camera Replacement

    Do you happen to have the details on this configuration? My front camera doesn't work either. I did replace my rear camera some time ago, and it's possible that's when I my front camera stopped working - but I'm really not sure.
  14. Dane

    GEN 1 Front Camera won't enable

    Have you found a part number for this switching module? Is it in the cab/dash or engine compartment?
Top