Recent content by bbl

I found that if you rotate the box link cleat about 25 degrees, position it with one corner in the slot, then rotate the cleat back to horizontal to seat the second corner, that the cleat easily slides from there. No hammer or Dremel needed.

Thank you for your service to the country - none of us would be driving Raptors without generations of people like you. Enjoy your new and well-deserved ride!

Thanks for the response and reference. Wilmington Tire put a set of Michelin Super Sport IVs on my wife's Benz, replaced the passenger side lower control arm and performed a DMV inspection. They were fair and top-notch but I didn't consider using them on my new Raptor because I thought Ford...

I moved to Wilmington NC, from northern CA, in June of 2018 and took order of my 2019 SCAB in March of 2019. I ordered it through a "friend" dealership several towns away, but too far to be convenient for routine maintenance. I see a lot of Raptors around Wilmington so I'm wondering who the...

I also have the OEM and its dual-purpose modality is excellent. My 2019 setup is the same as @btrflyglfr with the OEM bed cover but it can be difficult to actuate the OEM bed cover when the bed extender is folded in.

2019 SCAB MAGNETIC, 802A, CF (61C), BL (64D), GRAPHICS (55G&R), TECH PKG (68R), BED EXTNDR(63E), TG STEP(63T), BED LINER(96W)

According to Ford, the correct module for a 2019 Raptor is KN1Z-19A361-A so perhaps the JS7Z- module isn't 100% compatible with your 19? I plan to install the KN1Z on my 2019 Raptor in the next couple of days, without the bajamod bracket, so I'll let you know how it goes.

Don't want to hijack this thread but I have a 2019 Magnetic and am in the market for tint. Checked your build thread for details but there weren't any specifics wrt to tint. Can you provide a bit more color (pun intended)?

My 2019 SCAB arrived last Thursday and I couldn't be happier however my wife struggles to pull the passenger seatbelt into position for fastening. I have no trouble on the Driver's side and I noticed that the buckle on the driver's side is conveniently positioned above the rear door handle...

Picked up my Magnetic SCAB 802A w/Beadlock and CF on Thursday. It is so fun to drive that it must be illegal ;)

Looks like you missed one other update ;) https://www.fordraptorforum.com/posts/1323511/

Just got my VIN and build week - 2/25/19

2019 SCAB MAGNETIC, 802A, CF (61C), BL (64D), GRAPHICS (55G&R), TECH PKG (68R), BED EXTNDR(63E), TG STEP(63T), BED LINER(96W) - UNSCEDULED

Small update on my 10/17 SCAB order - now shows as "Pulled for Selection" on 1/7 (yes, 2 days from today) which according to the dealer means that I should get a build date next week.