Recent content by 6inaRow

@Baja Designs do you have the ELS for the LP9 Pro Racer edition? Do you have any isolux plots to compare the LP9's, LP6's and LP4's in the different beam patterns? Do you also have candela numbers for those lights as well? I know you have it listed for the XL Racer edition at 358,731 cd. So I'm...

I know I'm late to this and you've already found what looks to be a great solution that is also cost effective but I just saw this now. I'll post up anyway as to possibly help someone else out in a similar situation. The RV awning lights from super bright led's have worked really well for me on...

They are going to be bumper mounted lights. I like the looks and the IPT of the LP6's but the 20w chips and lower price of the XL80's have me contemplating between the two options. So the LP6's do shine farther than the XL80's? Due to the fact they have more spot optics I'm guessing even...

Hey BD, any updates planned in the near future for the XL80's? Just trying to weigh all my options. I've read that quite a few people prefer the output from the XL80's over the LP6's. Do you have anything to add to those comments? Do the higher power chips in the XL80's give more distance or...

Does anyone have light output comparisons of the LP4 driving combo to the LP6 and/or XL80? Thanks.

Thanks BD. Do you have any output shots or isolux plots comparing the XL80, LP4, LP6 and LP9 all in driving combo?

Hey BD, is there anything you can share with us about updates coming to the LP9 or LP6 lights? Changes in technology of LED's, lasers or IPT, etc.? Thanks.

Are you still planning on taking photos? No worries if not.

4x4TruckLEDs.com gave you great advice. I would also mention that putting some di-electric grease in those weatherpak connectors is also a good idea. I have had half a dozen or so be corroded quite badly after 2 years of use in my northern climate. Or you could switch them out to Deutsch dt04-2P...

An email was sent out today from BD to quite a few people stating that it's a lens insert that has been tested and approved by a 3rd party testing company. Basically (from what I've read) it is a light/glare shield that blocks the upper 5% of the diode. So the output should stay roughly the same...

Please post a review when you get these if you don't mind. These are at the top of my list for fog lights.

You are correct about this. They have SAE pro and sport in both J581 driving and J583 fog and the fog lights also meet the new J583 F3 standard which is the first so far. The selective yellow also uses a 4000k LED so will most likely be the brightest selective yellow auxiliary fog to date, but...

The SAE J583 standard is there so that fog lights don't blind the heck out of oncoming traffic, pedestrians and people you are driving behind. They need to have a decent cutoff that meets the standard for light output above the glare threshold. It's also for the fact that having excessive light...

That would be greatly appreciated! Thanks!

Interesting, are your LP6's driving combo's or are they spots? Are the IPT LED's worth it to you or are they drowned out by the XL80 wide cornering lenses?