NEW: Camburg Raptor 1.25 Uniball Upper Arms

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Sales_@_Camburg

Sales_@_Camburg

Full Access Member
Joined
Oct 31, 2013
Posts
70
Reaction score
109
Location
Huntington Beach, CA
Cases of bad racks appear to be more prevalent with after market tie rods than those that run stock tie rods.

This isn't a Raptor problem .. it runs across the board between trucks and brands. When you've changed all the suspension what is left ... the stock rack. It becomes the weak point since you've addressed every other part. The stock rack was never designed to be put through what some put them through. Yes you see it less with trucks that have the stock tie rods, but typically those trucks aren't being driven as hard as the trucks that have the upgraded steering ... hence why they upgraded the steering. It's a double edge sword.

Install parts that allow your truck to be driven harder and faster and you will have issues over time with other lighter duty parts. Sure a supercharger install claims better mileage, but everyone drives them harder and gets worse mileage after they install one ... that's why you got the supercharger ... more power! lol People upgrade their suspension and steering and drive it harder ... it's human nature.

I don't see heim steering being the issue. I see light duty steering racks being pushed beyond their design limits. After all ... we've been putting heim joints on various steering racks for 20+ years, it's nothing new.

- Sales @ Camburg
 
D

Deleted member 12951

Guest
Interesting. I wouldn't think most dealers would warranty the steering rack if you changed out enough steering parts that causes the rack to be the weakest point. Guess if they do, then consider being lucky but I doubt my dealer would.

Wondering if it would just be better to carry an extra set of stock tie rods instead. Would rather have the tie rods go then the steering rack. Can get a used set of rods for $100 vs. a rack for upwards of $1500.

Am I off track with that train of thought?
 

Huck

FRF Addict
Joined
Aug 26, 2012
Posts
4,200
Reaction score
1,839
Location
Chicago Sw Burbs
Rack is right around $1200. Ford replaced 3 for me before my service manager said he couldn't float another one. I paid for the last one.

I had one go out with no off-road trips or miles. About 8k street miles. Somehow my pump is still fine
 
OP
OP
Sales_@_Camburg

Sales_@_Camburg

Full Access Member
Joined
Oct 31, 2013
Posts
70
Reaction score
109
Location
Huntington Beach, CA
Just think how much more leverage a bigger 35" or 37" heavy aggressive tire puts on the rack with aftermarket wheels that have less backspacing than factory. Pushing the wheel out away from the hub puts way more load on the steering.

Really it's just a combination of vastly different parts and how the trucks being used. OEM parts can only handle so much.

- Sales @ Camburg
 

LONGISLANDRAPTOR

Full Access Member
Joined
Jun 10, 2013
Posts
647
Reaction score
283
Location
Long Island, NY
I saw in a previous post that the 1.25 upper arms allow for about one inch more travel with a fox 3.0. That's awesome! Dose the factory tie rod end bind at that droop angle or will a factory tie rod still allow for the 1 inch extra travel?


Sent from my iPhone using Tapatalk
 
OP
OP
Sales_@_Camburg

Sales_@_Camburg

Full Access Member
Joined
Oct 31, 2013
Posts
70
Reaction score
109
Location
Huntington Beach, CA
Can you please explain the issue with the stock caster that is fixed with this product?

With any arm we build we address caster, camber and camber curves to optimize the front end and improve handling characteristics and drive-ability. We add additional caster for improved cornering precision and straight line stability. Being on the low side already gives you a lethargic steering response and the truck wants to wander more especially going down dirt roads. That is all improved with additional caster.

- Sales @ Camburg
 
Top